Bedienungsanleitung Metabo KHA 18 LTX (Seite 11 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

594938

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH en

Note: The machine will cool more quickly if you

operate it at idling speed.

3. Metabo safety shutdown: The machine was

SWITCHED OFF automatically. If the slew rate

of the current is too high (for example, if the

machine suddenly seizes or kickback occurs),

the machine switches off. Switch off the machine

at the trigger switch

(10). Switch it on again and

continue to work as normal. Try to prevent the

machine from seizing.

7.2 Depth Stop Setting

Loosen the additional handle (1). Set depth stop (4)

to the desired drilling depth and retighten additional

handle (1).

7.3 On/Off switch, setting the speed

Switching on, speed: press the trigger switch (10).

Press in the trigger to increase the rotational speed.

Switching off: Release the trigger switch (10).

7.4 Operating mode selection

Press the lock (6) and turn the thumbwheel (5).

Drilling

Hammer drilling

Chiselling



When a chisel is fitted, only operate the

machine in the chiselling operating mode .

Avoid levering with the machine.

7.5 Setting chisel position

- Insert the chisel.

- Turn the switch button (5) to position .

- Turn the chisel to the required position.

- Turn the switch button (5) to position .

When a chisel is fitted, only operate the

machine in the chiselling operating mode .

7.6 Set direction of rotation, transportation

safety device

(switch-on lock)

Do not activate rotation selector switch (9)

unless the motor has completely stopped!

Set the rotation selector switch (9).

See page 2:

R = clockwise rotation set (for drilling, hammer

drilling, chiselling, inserting screws)

L = anti-clockwise rotation set (for the removal of

screws)

0 = middle position: transportation safety device

(Switch-on lock) set

7.7 Tool change with SDS chuck

Before fitting, clean tool shank and apply

special grease (accessories order no.

6.31800)! Use only SDS-Plus tools.

Inserting tools:

Turn tool and insert until it engages. The tool is

automatically locked.

Remove the tool:

See page 2, fig. A.

Pull tool lock (2) backwards in direction indicated by

arrow (a) and remove tool (b).

The vent slots of the machine should be cleaned

periodically.

Use only genuine Metabo accessories.

Use only accessories which fulfil the requirements

and specifications listed in these operating

instructions.

Fit accessories securely. Secure the machine if it is

operated in a bracket. Loss of control can cause

personal injury.

See page 4.

AChargers

B Battery packs with different capacities.

Use battery packs only with voltage suitable for

your power tool.

CMetabo carrying strap

D Tools with SDS-Plus shank

EConnecting piece

FGeared chuck

G Twist drills for metal and wood

H Screwdriver bit

I Special grease (for lubricating the tool shanks)

J Dust extraction systems:

a) Adapter for vacuum cleaner

b) Dust extraction set 43/50 mm

c) Chip and dust extraction unit

For a complete range of accessories, see

www.metabo.com or the catalogue.

Repairs to electrical tools must be carried out by

qualified electricians ONLY!

Contact your local Metabo representative if you

have Metabo power tools requiring repairs. For

addresses see www.metabo.com.

You can download a list of spare parts from

www.metabo.com.

Do not allow battery packs to come into contact with

water!

Protect the environment, and do not dispose

of power tools and battery packs with house-

hold waste. Observe national regulations on

separated collection and recycling of disused

machines, packaging and accessories

8. Maintenance, cleaning

9. Accessories

10. Repairs

11. Environmental Protection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KHA 18 LTX Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info