Bedienungsanleitung Metabo KHE 3251 (Seite 10 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595387

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENGLISHen

stopped by turning the sleeve in the opposite direc-

tion.

With a soft tool shank, retightening may be required

after a short period of operation.

If the chuck is very securely tightened: Unplug. Hold

drill chuck using an open-end spanner at the flats on

its head, and turn the sleeve (2) vigourously in the

direction of "AUF, RELEASE".

7.9 Metabo VibraTech (MVT)

For reduced vibrations and less stress on the

hands.

Always apply a moderate amount of pressure to the

handle when pushing down the machine and do not

force. Vibrations are reduced most effectively at the

central position (9).

Ventilation slits:

Clean the ventilation slits on the machine occasion-

ally.

KHE 3251:

- Always keep the spindle (6) clean and apply a

light coating of grease. (Special grease: Order

No.: 6.31800)

- Keyless chuck (1) cleaning:

After prolonged use, hold the chuck vertically, with

the opening facing down, and fully close it and

open it several times. The dust collected falls from

the opening. The application of cleaning spray to

the jaws and jaw openings at regular intervals is

recommended.

Use only genuine Metabo accessories.

Use only accessories which fulfil the requirements

and specifications listed in these operating instruc-

tions.

For a complete range of accessories, see

www.metabo.com or the accessories catalogue.

Repairs to electrical tools must be carried out by

qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline 2002/

96/EC on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately and

handed in for environmentally compatible recycling.

Explanation of details on page 3. Subject to

changes serving technical progress.

=Rated input

= Power output

= No-load speed

= Load speed

max

= Maximum drill diameter

max

=Maximum impact rate

W = Single impact force

S = Impact performance

b = Drill chuck chucking capacity

m = Weight without mains cable

D = Collar diameter

Measured values determined in conformity with EN

60745.

Machine in protection class II

~ Alternating current

The technical specifications quoted are subject to

tolerances (in compliance with the relevant valid

standards).

Emission values

Using these values, you can estimate the

emissions from this power tool and compare these

with the values emitted by other power tools. The

actual values may be higher or lower, depending on

the particular application and the condition of the

tool or power tool. In estimating the values, you

should also include work breaks and periods of low

use. Based on the estimated emission values,

specify protective measures for the user - for

example, any organisational steps that must be put

in place.

Vibration total value (vector sum of three directions)

determined in accordance with EN 60745:

h, HD

= Vibration emission value (hammer

drilling into concrete)

h, Cheq

= Vibration emission value (chiselling)

h,HD/Cheq

= Uncertainty (vibration)

Typical A-effective perceived sound levels:

=Sound pressure level

= Acoustic power level

, K

= Uncertainty

During operation the noise level can exceed

80 dB(A).

Wear ear protectors!

8. Maintenance, cleaning

9. Accessories

10. Repairs

11. Environmental Protection

12. Technical Specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KHE 3251 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info