Bedienungsanleitung Metabo KHE 5-40 (Seite 10 von 88) (Alle Sprachen)

625639

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISHen

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

3.4 Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the rate

for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and must

be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition that

may affect the power tool's operation. If

damaged, have the power tool repaired before

use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended could

result in a hazardous situation.

3.5 Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

Wear ear protectors. Exposure to noise can

cause hearing loss.

Use the auxiliary handle(s) supplied with the

tool. Loss of control may cause personal injury.

Hold the power tool by the insulated gripping

surfaces when performing an operation where

the cutting accessory may contact hidden

wiring or its own cord. Cutting accessory

contacting a "live" wire may make exposed metal

parts of the power tool "live" and could give the

operator an electric shock.

Pull the plug out of the socket before making any

adjustments, changing tools, maintaining or

cleaning.

Always work with the additional handle correctly

installed.

Always hold the machine with both hands on the

intended handles, take a secure stance and

concentrate on the work.

Always wear protective goggles, gloves, a dust

mask and sturdy shoes when working with this tool.

Ensure that the place where you wish to work is free

of power cables, gas lines or water pipes (e.g.

check using a metal detector).

Work only with a correctly fitted tool. Pull on the tool

to check that it is correctly seated. (It must be

possible to move the tool a few centimetres in an

axial direction.)

When working above ground level, ensure that the

area below you is clear.

Never touch the tool or parts near the tool directly

after work because they may be extremely hot and

can cause burns to the skin,

Always position the power cable so that it leads

away from the back of the machine.

A damaged or cracked additional handle must be

replaced. Never operate a machine with a defective

additional handle.

Secure the workpiece to prevent slipping or rotation

(e.g. by securing with screw clamps).

Reduce dust exposure:

Some of the dust created using this power tool

may contain chemicals known to cause

cancer, allergic reaction, respiratory disease, birth

defects or other reproductive harm. Some

examples of these chemicals are: Lead from lead-

based paints, crystalline silica from bricks and

cement and other masonry products, arsenic and

chromium from chemically-treated lumber, hard

wood like oak or beech, metals, asbestos.

The risk from exposure to such substance will

depends on how long you or bystanders are being

exposed.

Do not let particles enter the body.

To reduce your exposure to these substances: work

in a well ventilated area, and work with approved

safety equipment, such as dust masks that are

specially designed to filter out microscopic

particles.

Observe the relevant guidelines for your material,

staff, application and place of application (e.g.

occupational health and safety regulations,

disposal).

Collect the generated particles at the source, avoid

deposits in the surrounding area.

Use suitable accessories for special work. In this

way, fewer particles enter the environment in an

uncontrolled manner.

Use a suitable extraction unit.

Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the

exhaust air stream at yourself or nearby persons

or on dust deposits.

- Use an extraction unit and/or air purifiers.

4. Special Safety Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KHE 5-40 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info