Bedienungsanleitung Metabo KHE 55 (Seite 11 von 62) (Alle Sprachen)

625641

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

ENGLISH

ENG

8.4 Setting chisel position

The Chisel can be locked in 8 different positions.

Insert the chisel.

Press the lock (3) and hold in.

Turn the switch button (2) until it points upwards

(between position and ). Let go of the

lock.

Turn the chisel in the direction of the arrow until it

is in the desired position.

Press the lock (3) and hold in.

Turn the switch button (2) to position .

Release the lock (3) and check that the switch

button (2) has engaged.

Turn the chisel in the direction of the arrow until it

engages.

When a chisel is fitted, only operate the

machine in the chiselling operating

mode.

8.5 Setting impact force and speed

Turn the adjusting wheel (8) to the desired value.

The higher the number, the greater the speed and

the higher the impact force.

The correct setting is found by trial and error.

Example: if soft, brittle materials are being

chiselled, or cracking is to be kept to a minimum,

set the adjusting wheel to "1“ to "2“ (low impact

force).

For demolition or for drilling into harder materials,

set the adjusting wheel to the highest number

(max.power).

8.6 Switching On and Off

To switch on:

press the trigger switch (5).

To switch off:

release the trigger switch (5).

When working with the chisel hammer, only a

moderate amount of press-on pressure (approx.

20 kg) is required. High press-on pressure does

not increase work capacity and can possibly

shorten the service life of your tool.

In the case of deep bores, pull the drill bit out of the

bore from time to time in order to remove the stone

dust.

Motor cleaning: blow out the machine regularly

and thoroughly through the air slots with

compressed air.

Electronic signal indicator (6):

Rapid flashing - CODE! System

The tool was locked with a CODE! Key. The elec-

tronic anti-theft device is active. The tool can be

unlocked again with a CODE! key.

Slow flashing - carbon brushes worn (only KHE 75)

The carbon brushes are almost completely worn. If

the brushes are completely worn, the machine

switches off automatically. Have the brushes

replaced by an authorised service centre.

Continuous light - Service call-up

The tool cut out automatically. Bring the tool to a

Metabo Service Centre.

Rotational speed fluctuations:

High-energy, high-frequency interference can

cause rotational speed fluctuations up to the

maximum idling speed. The fluctuations disappear

again as soon as the interference fades away.

Use only genuine Metabo accessories.

If you need any accessories, check with your dealer.

For dealers to select the correct accessory, they

need to know the exact model designation of your

power tool.

See page 4:

A Extensive range of chisels for a wide variety of

applications.

B Special grease (for lubricating the tool shanks)

CCODE! key

Repairs to electrical tools must be carried out by

qualified electricians ONLY!

Any Metabo power tool in need of repair can be

sent to one of the addresses listed in the spare

parts list.

Please enclose a description of the fault with the

power tool.

Metabo's packaging can be 100% recycled.

Scrap power tools and accessories contain large

amounts of valuable resources and plastics that

can be recycled.

These instructions are printed on chlorine-free

bleached paper.

9 Tips and Tricks

10 Maintenance

11 Troubleshooting

12 Accessories

13 Repairs

14 Environmental Protection

17026726_0107 KHE 75 KHE 55.book Seite 11 Freitag, 26. Januar 2007 8:42 08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KHE 55 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info