Bedienungsanleitung Metabo KHE 76 (Seite 11 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595390

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

ENG

Always wear protective goggles, gloves, a dust

mask and sturdy shoes when working with this

tool.

Ensure that the spot where you wish to work is free

power cables, gas lines or water pipes

(e.g.

using a metal detector).

Always work with the tool attached correctly. Pull

on the tool to check that it is seated correctly. (It

must be possible to move the tool a few centime-

tres in an axial direction.)

When working above ground level, make sure that

the area underneath is free.

Do not touch the tool or parts close to the tool

immediately after stopping work because they

may still be extremely hot and could cause skin

burns.

Always lay the power cable away from the back of

the machine.

A damaged or cracked additional handle must be

replaced. Never operate a machine with a defec-

tive additional handle.

Dust from material such as paint containing lead,

some wood species, minerals and metal may be

harmful. Contact with or inhalation of the dust may

cause allergic reactions and/or respiratory

diseases to the operator or bystanders.

Certain kinds of dust are classified as carcinogenic

such as oak and beech dust especially in conjunc-

tion with additives for wood conditioning (chro-

mate, wood preservative). Material containing

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is

recommended.

Follow national requirements for the materials you

want to work with.

See page 3.

1 Additional handle

2 Additional handle holder

3 Star knob for adjusting the clamping power of

the additional handle holder

4 Tool lock

5 Switch button

6 Thread for additional handle

7 Metabo VibraTech (MVT): integrated damping

system

8 Locking button for continuous activation

9 Trigger switch

10 Carbon brush service indicator (lamp signal

for pending carbon brush change)

11 Operating indicator (light signal for mains

power supply)

12 Switch for optional impact reduction when

working on soft materials

• Metabo VibraTech (MVT) vibration damper: a

spring-mounted counter-oscillating weight

reduces the vibrations by more than 30%

• Metabo VibraTech (MVT): integrated damping

system in the handles for reduced vibrations

and less stress on the hands

• Additional handle can be attached to the

housing at 3 different points

• Optional impact reduction of up to 30% for

working on softer materials such as brick

• Lockable switch for convenient operation

during continuous chiselling

• Electronic smooth start-up for precision drilling

• Low-weight cast magnesium gear housing

ensures excellent heat dissipation

• Service indicator e.g. for signalling pending

carbon brush changes and light signal for mains

power supply

Before plugging in, check to see that the

rated mains voltage and mains frequency,

as stated on the rating label, match with your

power supply.

Always use an extension cable with a minimum

diameter of 1.5 mm

. The extension cable must be

suitable for the machine power rating (see Tech-

nical Specifications). If using a roll of cable, always

roll up the cable completely.

7.1 Assembly / setting of additional handle

For safety reasons, always use the addi-

tional handle (1)supplied.

Option 1

Unscrew the star knob (3). Move the additional

handle to the required angle. Tighten the star knob

(3) firmly to secure the additional handle (1) prop-

erly.

The

additional handle

(1)

must be reliably

secured against turning. Check that the

knob is tight before using the machine.

required, tighten the star knob (3) again to

increase the clamping power.

Option 2

Upright working position for reduced stress on the

back when working on floors:

5Overview

6 Special Product Features

7 Commissioning

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo KHE 76 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info