Bedienungsanleitung Metabo MT 400 Quick (Seite 8 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

665591

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISHen

- Ensure good ventilation of the workplace and

keep it clean using a vacuum cleaner. Sweeping

or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow,

beat or brush.

See page 2.

1LED lights

2 Release lever

3Slide switch

4Handle

5 Setting wheel for speed adjustment

6 Extractor connection piece *

7 Dust extraction *

8Adapter for FEIN

-tools *

9Gear box flange

10 Tool holder

11 Accessories *

12 Spring pin

13 Sanding disc *

*depending on the features / model

Before plugging in, check that the rated mains

voltage and mains frequency, as stated on the

rating label, match with your power supply.

Always install an RCD with a max. trip current

of 30 mA upstream.

7.1 Attach dust extraction (only when working

with triangular sanding plate)

See figure, page 2

- Remove tool (11).

- Place the dust extraction (7) onto the gear box

flange (9):

Fit as illustrated in the graphic.

- Connect a suitable extraction unit with its

extraction hose to the inserted intake socket (6) .

7.2 Attaching the accessory

Disconnect the mains plug before changing

any accessories.

Danger of injury due to the sharp accessories.

After stopping work, the tool may still be hot.

Danger of crushing when changing the tool. Wear

protective gloves.

Use only accessories with an OIS holder or a

compatible holder.

Use only sharp, undamaged saw blades. Do

not use accessories that are cracked or that

have changed their shape. Use an accessory that is

suitable for the material being sawn.

See Fig. A, page 2.

1. Open the release lever (2) until the stop.

2. Remove the spring pin (12) .

3. Place the accessory (11) in the desired position

onto the tool holder (10) . Ensure that it engages

in the cams of the tool holder (10) .

4. Insert the spring pin (12) until the stop.

5. Caution! The clamping lever (2) can snap back

and crush your fingers. Handle with care. Wear

protective gloves.

Close the release lever (2) until the stop and

lock. (The release lever has to be in contact with

the housing).

6. Check the accessories for firm hold.

Note:

For FEIN

-accessories place the supplied

adapter (8), as shown, on the tool holder (10) . See

figure, page 2.

7.3 Installation of sanding disc

Simple attachment and removal thanks to the

velcro-type fastening. Simply press on the sanding

disc (13) such that the holes in the sanding disc are

aligned with the support plate.

7.4 Switching On and Off

Switch on first, then guide the accessory

towards the workpiece.

Avoid inadvertent starts: always switch the

tool off when the plug is removed from the

mains socket or if there has been a power cut.

Avoid the machine swirling up or taking in dust

and chips. After switching off the machine,

only place it down when the motor has come to a

standstill.

Machines with slide switch:

Switching on: Push the slide switch (8) forwards

(continuous operation).

Switching off: Push the slide switch (8)

backwards.

7.5 Setting the oscillating frequency

Set the oscillating frequency on the adjustment

wheel (5). This can also be done during operation.

The best way to determine the ideal setting is

through a practical trial.

7.6 Working Directions

Sanding: The best way to determine the ideal

setting is through a practical trial. Apply moderate

pressure on the machine and move it to and fro

across the surface.

Cutting, sawing: Set high oscillating frequency.

Press down the machine evenly. Avoid jamming!

For plunge cuts: A light tilting movement increases

the work progress.

Scraping: Set medium to high oscillating

frequency.

Hold the accessory at a flat angle to the workpiece.

Use only genuine Metabo accessories.

5. Overview

6. Commissioning

7. Use

8. Accessories

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo MT 400 Quick Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info