Bedienungsanleitung Metabo POWERMAXX ASE (Seite 11 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595102

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH en

Check the guide (11) to ensure that it is

securely fitted.

7.1 Switching on and off, stroke rate,

switch-on lock (4):

Trigger (8) locked.

Trigger (8) unlocked.

Switching on, speed: Press the trigger (8). The

stroke rate can be changed by pressing in the

trigger.

Switching off: Release the trigger (8).

7.2 Working instructions

Sawing:

Use a saw blade geared to the material to be sawn.

Press the machine with the guide (11) against the

workpiece. Switch on the machine, and only then

guide the saw blade against the workpiece.

Do not make contact with any objects or with the

ground with the moving saw blade (risk of recoil or

of breaking the saw blade).

Adapt the stroke rate to the material to the sawn.

Avoid excessive pressure on the saw blade (partic-

ularly in the case of long saw blades).

If the saw blade jams, turn the machine off immedi-

ately. Widen the sawn gap slightly with a suitable

tool and take out the machine.

After completing the sawing cut, switch off the

machine and only take it out of the sawn gap to

place it down once the saw blade has come to a

standstill (danger of recoil).

Lock the machine with the switch-on lock (4) to

prevent it from switching on inadvertently.

Plunge cuts:

Plunge cuts may only be made in soft materials

such as wood or plastic. Only use short saw blades.

Hold the machine with both hands at the intended

handles, take a secure stance and concentrate on

the work.

See illustration, page 3: The machine is pressed

with the edge of the guide (11) against the work-

piece. The saw blade does not make contact with

the workpiece. Switch on machine. The corner of

the guide serves as a pivot point around which the

machine is slowly aligned, whereby the saw blade

cuts into the workpiece.

On a regular basis, use compressed air to blow out

the machine through the motor ventilation slots.

Clean regularly: Press button (10) and remove

guide (11). Hold the device downwards in a vertical

position without the saw blade and, using your

hand, lightly tap on the machine. The accumulated

dust falls out. Do not oil or grease.

Use only genuine Metabo accessories.

See page 4.

Use only accessories which fulfil the requirements

and specifications listed in these operating instruc-

tions.

A Comprehensive range of saw blades for a wide

variety of materials and use cases

BBattery charger

CBattery packs

D Lubricating stick for cooling the saw blades

when sawing metal

For a complete range of accessories, see

www.metabo.com or the catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Battery packs must not be disposed of with regular

waste. Return faulty or used battery packs to your

Metabo dealer!

Do not allow battery packs to come into contact with

water!

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline 2002/

96/EC on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately and

handed in for environmentally compatible recycling.

Before disposal, discharge the battery pack in the

power tool. Prevent the contacts from short-

circuiting (e. g. by protecting them with adhesive

tape).

Explanatory notes on the specifications on page 3.

Changes due to technological progress reserved.

U =Voltage of battery pack

=Stroke rate at idle speed

s=Stroke length

m =Weight (with smallest battery pack)

Measured values determined in conformity with EN

60745.

Direct current

7. Use

8. Servicing

9. Accessories

10. Repairs

11. Environmental Protection

12. Technical Specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo POWERMAXX ASE Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info