Bedienungsanleitung Metabo PowerMaxx LED SLA 14.4-18 LED (Seite 6 von 36) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595082

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Original instructions

1. General safety instructions

ENGLISHen

WARNING – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety warn-

ings and instructions may result in electric shock,

fire and/or serious injury.

Keep all safety instructions and information for

fut

ure reference.

Always charge batteries in chargers recommended

by the manufacturer.

Chargers designed for a specific

type of battery may pose a fire hazard when used

together with other battery types.

You must always insert the correct batteries in the

lamp.

Using other batteries may cause injuries and pose

a fire hazard.

When not in use, keep batteries away from paper

clips, coins, keys, nails, screws or other small metal

objects that could bridge the contacts.

Short circuits

between battery contacts can cause burns or fires.

Fluid may escape if batteries are used inappropri-

ately. Avoid all contact with this fluid. In the event of

accidental skin contact, rinse the affected area thor-

oughly. If the fluid enters your eyes, seek immediate

medi

cal assistance.

Escaping battery fluid can cause

skin irritation or burns.

Do not operate the lamp in potentially explosive

environments containing flammable dust, fluids or

gases .

The lamp can generate sparks which may ignite

dust or vapours.

Avoid accidental operation. Make sure that the lamp

is switched off before connecting the battery and

before picking up or carrying the lamp.

Accidentally

pressing the switch on the device or connecting the

device to the power supply when already switched on

can lead to accidents.

Always switch off the lamp when not in use.

Never use electrical devices with a defective switch.

Electrical devices that can no longer be switched on or off

are dangerous and must be repaired immediately.

Remove the battery before adjusting, cleaning and

storing the device or changing accessories.

These

precautionary measures prevent accidental operation of

the lamp.

When not in use,

keep the lamp out of the reach of

children. Do not allow personnel to use the device

unless they are already familiar with it or have read

these instructions.

Electrical devices are dangerous

when used by inexperienced personnel.

Maintain the device carefully. Check that all moving

parts are functioning correctly and do not seize,

make sure that no parts are broken or damaged to

an extent where they affect the function of the lamp.

Have damaged parts repaired before using the

device.

Many accidents are caused by poorly main-

tained electrical tools.

Do not operate the lamp without a window, or with a

window that is damaged.

Use the lamp, accessories, etc. as described in

hese instructions. Take into consideration the

working conditions and tasks required.

Using elec-

trical devices for applications other than those intended

can lead to dangerous situations.

Always have your lamp repaired by qualified

personnel using genuine spare parts.

This will ensure

that the device functions safely.

Keep your lamp away from heat sources and fires.

Do not store your lamp in moist or wet ambient

conditions. Do not store in locations where temper-

atures may reach or exceed 40 °C.

Examples include

alcoves, motor vehicles or metal structures during the

summer.

Do not expose the lamp to rain or damp conditions.

Do not leave the lamp on while unattended.

The device is designed for use indoors.

Never use an incomplete lamp, or one on which an

nauthorised modification has been made. Do not

switch on the lamp if tool parts or guard devices are

missing or defective.

Ensure it is steady. Secure the lamp properly if it is

tached to a stand.

Protect battery packs from water and mois-

ture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short-circuit b

attery packs!

Slightly acidic, flammable fluid may leak from

defective li-ion battery packs!

If battery fluid leaks out and comes into contact

with your skin, rinse immediately with plenty of

water.

If battery fluid leaks out and comes into

contact with your eyes, wash them with clean water and

seek medical attention immediately.

Warning - general danger!



Battery packs must not be disposed of with regular

ste. Return faulty or used battery packs to your

Metabo dealer!

Do not allow battery packs to come

into contact with

water!

Do not direct the light beam into the eyes of

people or animals.

In accordance with IEC

/EN 62471 for "Photobio-

logical safety of lamps and lamp systems", these

lamps are in

the Exempt Group.



2. Overview

See image on the title page.

1 Window/outlet of LED beam

2 Lamp head

3 On/off switch

4 Battery pack release button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo PowerMaxx LED SLA 14.4-18 LED Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info