Bedienungsanleitung Metabo PowerMaxx SB 12 BL (Seite 12 von 76) (Alle Sprachen)

816514

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISHen

Observe the national regulations on

environmentally compatible disposal and on the

recycling of disused tools, packaging and

accessories.

Packaging materials must be disposed of according

to their labelling in accordance with municipal

guidelines. Further information can be found at

www.metabo.com in the “Service” section.

Battery packs may not be disposed of with regular

waste. Return faulty or used battery packs to your

Metabo dealer!

Do not allow battery packs to come into contact with

water!

Protect the environment, and do not dispose

of power tools and battery packs with house-

hold waste. Observe national regulations on

separated collection and recycling of disused

machines, packaging and accessories.

Discharge the battery pack in the power tool before

disposal. Prevent the contacts from short-circuiting

(e.g. by protecting them with adhesive tape).

Explanatory notes on the specifications on page 3.

Subject to change in accordance with technical

progress.

U=voltage

(for 12 V battery pack: max. voltage =

12 V, nom. voltage = 10.8 V)

n0 = No-load speed

Tightening torque for screwing:

MA= soft screwing application (wood)

MB= hard screwing application (metal)

MC= adjustable torque (with torque control)

Max. drill diameter:

D1 max= in steel

D2 max= in softwood

D3 max= in masonry

s=max. impact rate

m = Weight (with the smallest battery pack)

G=Spindle thread

Measured values determined in conformity with EN

62841.

Permitted ambient temperature during operation:

-20 °C to 50 °C (limited performance with

temperatures below 0 °C). Permitted ambient

temperature for storage: 0 °C to 30 °C

direct current

The technical specifications quoted are subject to

tolerances (in compliance with relevant valid

standards).

Emission values

These values make it possible to assess the

emissions from the power tool and to compare

different power tools. The actual load may be higher

or lower depending on operating conditions, the

condition of the power tool or the accessories used.

Please allow for breaks and periods when the load

is lower for assessment purposes. Arrange

protective measures for the user, such as

organisational measures based on the adjusted

estimates.

Vibration total value (vector sum of three directions)

determined in accordance with EN 62841:

ah, ID = Vibration emission value

(impact drilling in concrete)

ah, D = Vibration emission value

(Drilling in metal)

ah, S = Vibration emission value (screwing

without impact)

Kh, ... = Uncertainty (vibration)

Typical A-effective perceived sound levels:

Lpa = Sound-pressure level

LWA = Acoustic power level

KpA, KWA= Uncertainty (noise level)

During operation the noise level can exceed

80 dB(A).

Wear ear protectors!

9. Environmental Protection

10. Technical Specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo PowerMaxx SB 12 BL Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info