Bedienungsanleitung Metabo PowerMaxx SSD (Seite 9 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595111

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH en

Causes and remedies:

1. Battery pack almost flat (the electronics

prevent the battery pack from discharging totally

and avoid irreparable damage).

If the battery pack is almost flat, it must be

recharged.

2. Long continuous overloading of the machine will

activate the temperature cut-out.

Leave the machine or battery pack to cool.

Note:

The machine will cool more quickly if you

operate it at idling speed.

6.2 Battery pack

Charge the battery pack before use.

If performance diminishes, recharge the battery

pack.

Removing the battery pack

Press the battery pack release button (6) and

remove the battery pack (7).

To fit

Slide in the battery pack (7) until it engages.

6.3 Setting the direction of rotation,

engaging the transporting safety device

(switch-on lock)

Do not actuate the rotation selector switch or

engage the transportation lock (4) unless the

motor has stopped completely!

Actuate the rotational direction switch /

Engage the transportation lock (4)

R = Right rotation set

(insert screws)

L = Left rotation set

(remove screws)

0 = Central position: transportation lock setting

(switch-on lock)

6.4 Switching on and off

To switch on: press the trigger switch (5).

Switching off: Release the trigger (5).

6.5

Speed

/ Tightening torque

The speed and tightening torque are connected

directly. The lower the speed, the lower the

tightening torque.

Stepless adjustment of the tightening torque:

The speed and tightening torque can be adjusted

steplessly by pressing the trigger (5) firmly or lightly,

thus adapting to working conditions.

Recommendation: determine the correct setting

by carrying out trial screwdriving.

6.6

Changing

screwdriver bit

Inserting screwdriving bit: Slide locking sleeve

(2) forward and insert screwdriving bit as far as the

stop. Release locking sleeve (2).

Pull on the screwdriver bit to check that it is

correctly seated.

Removing screwdriving bit: Slide locking sleeve

(2) forward and remove screwdriving bit.

Only use screwdriving bits with such plug-in

ends:

The screwdriving bit used must match the

screw.

Damaged screwdriving bits must not be used.

Mount the machine on the screw, ensuring it is

aligned straight.

The screwdriving process has two elements:

inserting the screw and

tightening the screw with the percussion

mechanism.

The tightening torque depends on the impact

duration.

With an impact duration of approx. 5 seconds, the

maximum tightening torque has been reached.

The torque curve depends on the type of

application:

With a hard screwdriving application (screw-

couplings in hard material such as metal), maximum

tightening torque is already reached after a short

impact duration (a).

With a soft screwdriving application (screw-

couplings in soft material such as wood), a longer

impact duration (b) is required.

Recommendation: determine the correct impact

duration by carrying out trial screwdriving.

Caution! With small screws, maximum torque can

be reached even below an impact duration of 0.5

seconds.

- This is why the duration of the screwdriving

process must be monitored exactly.

- Adjust the tightening torque by pressing firmly or

lightly on the trigger (5), ensuring that the screw is

not damaged or that the screw head does not tear

off.

Use only genuine Metabo accessories.

7. Use

8. Accessories

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo PowerMaxx SSD Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info