Bedienungsanleitung Metabo RWE 1100 (Seite 11 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600607

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENGLISH

ENG

To attach it:

Put the stirrer quick-change system onto the

spindle (a). Turn the locking device in the direction

of the arrow (b) until the stirrer quick-change

system can be pushed completely onto the

spindle. Let go of the locking device. Check

whether the stirrer quick-change system is tight.

To remove:

Turn the locking device in the direction of the

arrow up to the stop (a) and remove (b).

Repairs to electrical tools must be carried out by

qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service

centre. For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Metabo's packaging can be 100% recycled.

Worn out power tools and accessories contain

considerable amounts of valuable raw and plastic

materials, which can be recycled.

These instructions are printed on chlorine-free

bleached paper.

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline

2002/96/EC on used electronic and electric

equipment and its implementation in national legal

systems, used power tools must be collected

separately and handed in for environmentally

compatible recycling.

Explanatory notes on the information on page 2.

Changes due to technological progress reserved.

= Rated power consumption

= Power output

= No load speed

= On load speed

G = Spindle thread

m=Weight

D = Spindle collar diameter

Vibration total value (vector sum of three

directions) determined in accordance with

EN 60745:

h, D

= Vibration emission value

h, D

= Unsafe (vibration)

The vibration emission level given in this informa-

tion sheet has been measured in accordance with

a standardised test given in EN 60745 and may be

used to compare one tool with another. It may be

used for a preliminary assessment of exposure.

The declared vibration emission level represents

the main applications of the tool. However if the

tool is used for different applications, with different

accessories or poorly maintained, the vibration

emission may differ. This may significantly

increase the exposure level over the total working

period.

An estimation of the level of exposure to vibration

should also take into account the times when the

tool is switched off or when it is running but not

actually doing the job. This may significantly

reduce the exposure level over the total working

period.

Identify additional safety measures to protect the

operator from the effects of vibration such as:

maintain the tool and the accessories, keep the

hands warm, organisation of work patterns.

Typical A-effective perceived sound levels:

= Sound pressure level

= Acoustic power level

, K

= Unsafe (noise level)

During operation the noise level can exceed

80 dB(A).

10 Repairs

11 Environmental Protection

12 Technical Specifications

17026753_0513 RWE 1100.book Seite 11 Dienstag, 7. Mai 2013 10:49 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo RWE 1100 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info