Bedienungsanleitung Metabo SB 18 LTX BL Impuls (Seite 12 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

594952

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH en

Impact drilling

Torque

Fig. A

1Keyless chuck

2 Additional handle

3 Slide switch (normal drilling, impact drilling) *

lide switch (1st/2nd gear)

5 Button (switch between 'max. torque' and function

set at setting wheel (13)) *

6 Rotation selector switch (rotation setting,

transport lock) - both sides of the machine

7Bit depot *

8Belt hook *

attery pack release button

10 Capacity indicator button

11 Capacity and signal indicator

Battery pack

13 Setting wheel (pulse function, torque control,

where applicable

'max. torque') *

14 LED lights

15 Trigger switch

*equipment-specific

7.1 Battery pack, capacity and signal display

Fig. B

Charge the battery pack before use.

If performance diminishes, recharge the battery

pack.

The ideal storage temperature is between 10 °C

and 30 °C.

7.2 Removing, replacing battery pack

Fig. C

7.3 Setting direction of rotation, transporting

safety device (switch-on lock) Fig. D

7.4 Selecting gear stage Fig. E

Only actuate slide switch (4) with the motor at

a standstill!

7.5 Setting for normal drilling, impact drilling

Fig. A

Press the slide switch (3).

7.6 Setting torque control, maximum torque,

pulse function

Do not work for long periods with pulse func-

tion switched on! (The motor can overheat.)

Machines with designation ...18 LTX

BL Quick...:

Fig. F

Turn the setting wheel (13) to switch on the pulse

function (button (5) flashes) or to switch on the

torque control (button (5) lights up continuously)

For maximum torque (drilling position), press the

button (5) (the button (5) is not illuminated). To acti-

vate the settings of setting wheel again: press the

button (5) again or turn the setting wheel.

Machines with designation ...18 LTX

Impuls/

Quick, ...18 LTX BL Impuls: Fig. G

Set the desired operating mode at the setting wheel

(13):

1...10 = torque control

Drill bit = maximum torque

Impuls = pulse function

7.7 Switching on/off, setting speed

Fig. A

Switching on, speed: Press the trigger (15). The

speed can be changed by pressing in the

trigger.

Switching off: release the trigger switch (15). Note:

The noise that the machine makes when it

switches off is due to the design (quick stop)

and has no influence on the function or the

service life of the machine.

7.8 Keyless chuck Fig. H

With a soft tool shank, retightening may be required

after a short period of operation.

Notes on

machines with the designation SB...

1. The ratchet sound which can possibly be heard

after opening the drill chuck is functional and is

switched off by a reverse rotation of the sleeve.

2. Clamping tool:

Turn sleeve (1) in direction "GRIP, ZU" until the

noticeable mechanical resistance has been

overcome.

Caution! The chuck is not yet fully tight-

ened! Keep turning the sleeve (it must "click"

when turning)) until it cannot be turned any

further - only now is the tool safely clamped.

Cleaning: From time to time, hold the machine

vertically with the keyless chuck facing

downwards and turn the sleeve fully in direction

"GRIP, ZU" and then turn fully in direction

"AUF, RELEASE". The dust collected falls from

the keyless chuck.

7.9 Unscrewing chuck Fig. I

Employ the same procedure when attaching the

chuck, except in reverse order.

7.10 Chuck with quick bit change system (for

BS 14.4 LTX Quick, BS 18 LTX Quick)

Fig. J

To remove: Push the interlock ring forward (a),

advance and pull off the chuck (b).

To mount: Push the interlock ring forward and

move the chuck as far as the limit stop on the drill

spindle.

6. Overview

7. Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SB 18 LTX BL Impuls Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info