Bedienungsanleitung Metabo SB 18 LTX BL QI (Seite 12 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

665579

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISHen

Use a suitable extraction unit.

Reduce dust exposure with the following measures:

- do not direct the escaping particles and the

exhaust air stream at yourself or nearby persons

or on dust deposits.

- use an extraction unit and/or air purifiers.

- ensure good ventilation of the workplace and keep

clean using a vacuum cleaner. Sweeping or

blowing stirs up dust.

- Vacuum or wash the protective clothing. Do not

blow, beat or brush.

Transport of li-ion battery packs:

The shipping of li-ion battery pack is subject to laws

related to the carriage of hazardous goods (UN

3480 and UN 3481). Inform yourself of the currently

valid specifications when shipping li-ion battery

packs. If necessary, consult your freight forwarder.

Certified packaging is available from Metabo.

Only send the battery pack if the housing is intact

and no fluid is leaking. Remove the battery pack

from the machine for sending. Prevent the contacts

from short-circuiting (e.g. by protecting them with

adhesive tape).

Illustrations are provided at the beginning of the

operating instructions.

Symbol explanation:

Movement direction

Drill bit

Slow

Fast

First gear

Second gear

Third gear

Screws

Drills, screws, threaded rods

Impact drilling

Torque

Fig. A

1Keyless chuck

2 Additional handle

3 Slide switch (normal drilling, impact drilling) *

4Gear switch

5 Rotation selector switch (rotation setting,

transport lock) - both sides of the machine

6Bit depot *

7Belt hook *

8 Battery pack release button

9 Capacity indicator button

10 Capacity and signal indicator

11 Battery pack

12 Setting wheel for

- Pulse function

- Torque control

- max. torque

13 LED light

14 Trigger switch

*equipment-specific

7.1 Battery pack, capacity and signal

indicator Fig. B

Charge the battery pack before use.

Recharge the battery pack if performance dimin-

ishes.

The ideal storage temperature is between 10°C and

30°C.

7.2 Removing and inserting the battery pack

Fig. C

7.3 Setting the direction of rotation,

engaging the transporting safety device

(switch-on lock) Fig. D

7.4 Select the gear Fig. E

Do not set the gear switch (4) unless the motor

has stopped completely!

7.5 Set drill, hammer drill Fig. A

Activate slide switch (3).

7.6 Setting torque control, maximum torque,

pulse function

Do not work for long periods with pulse

function switched on! (The motor can

overheat.)

Fig. F

Set the desired operating mode at the setting wheel

(12):

1...10 = Torque control

= maximum torque

= Pulse function

7.7 Switching On/Off, setting the speed

Fig. A

Switching on, speed: press the trigger switch (14)

. Press in the trigger switch to increase the

rotational speed.

Switching off: release the trigger switch (14). Note:

the noise that the machine makes when it

switches off is due to the design (quick stop)

and has no influence on the function or the

service life of the machine.

5. Figures

6. Overview

7. Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SB 18 LTX BL QI Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info