Bedienungsanleitung Metabo SB 18 LTX Impuls (Seite 13 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

594954

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH en

7.11 Attaching the belt hook (depending on

machine features) / bit depot (depending

on machine features Fig. K

Attach the belt hook to the left (8), as shown.

Attach the bit depot to the right (7), as shown.

8.1

The machine's multifunctional monitoring

system

If the machine switches off automatically, the

machine electronics have activated automatic

protection mode. A warning signal sounds (contin-

uous beeping). The beeping stops after a maximum

of 30 seconds or when the trigger (15) is released.

In spite of this protective function, overloading

is still possible with certain applications and

can result in damage to the machine.

Causes and remedies:

1. Battery pack almost empty Fig. A, B (The

electronics protect the battery pack against

damage through total discharge).

If one LED is flashing (11), the battery pack is

almost flat. If necessary, press the (10) button

and check the LEDs (11) to see the charge

level. If the battery pack is almost flat, it must be

recharged.

2. Long continuous overloading of the machine will

activate the temperature cut-out.

Leave the machine or battery pack to cool.

Note:

If the battery pack feels very warm, the

pack will cool more quickly in an "AIR COOLED"

charger.

Note:

The machine will cool more quickly if you

operate it at idling speed.

3. Metabo safety shutdown: The machine was

SWITCHED OFF automatically. If the slew rate

of the current is too high (for example, if the

machine suddenly seizes or kickback occurs),

the machine switches off. Switch off the machine

at the trigger (15). Switch it on again and

continue to work as normal. Try to prevent the

machine from seizing.

Switch off the machine at the trigger (15). Then

continue working as normal. Try to prevent the

machine from seizing.

8.2 Note:

The LED lamp (14) switches off automatically after

a specific time.

To activate the electronic functions: press the

trigger (15).

Use only genuine Metabo accessories.

Use only accessories that fulfil the requirements

and specifications listed in these operating instruc-

tions.

Fit accessories securely. Secure the machine if it is

operated in a bracket. Loss of control can cause

personal injury.

For a complete range of accessories, see

www.metabo.com or the main catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Do not allow battery packs to come into contact with

water!

To protect the environment, do not dispose of

power tools or battery packs in household

waste. Observe national regulations on

separated collection and recycling of disused

machines, packaging and accessories.

Before disposal, discharge the battery pack in the

power tool. Prevent the contacts from short-

circuiting (e. g. by protecting them with adhesive

tape).

Fig. L. We reserve the right to make technical

improvements.

U = Voltage of battery pack

= No-load speed

Tightening torque for screwing:

= Soft screwing application (wood)

=Pulse torque

= Hard screwing application (metal)

= Adjustable torque

Max. drill diameter:

1 max

= in steel

2 max

= in softwood

3 max

= in concrete

s=Max. impact rate

m = Weight (with smallest battery pack)

G=Spindle thread

max

= Chuck clamping range

Measured values determined in conformity with

EN 60745.

Direct current

The technical specifications quoted are subject to

tolerances (in compliance with the relevant valid

standards).

Emission values

Using these values, you can estimate the

emissions from this power tool and compare these

with the values emitted by other power tools. The

actual values may be higher or lower, depending on

the particular application and the condition of the

8. Troubleshooting

9. Accessories

10. Repairs

11. Environmental Protection

12. Technical specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SB 18 LTX Impuls Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info