Bedienungsanleitung Metabo SBE 610 (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

599612

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH en

Original instructions

We declare under our sole responsibility: These

impact drills, identified by type and serial number

*1), comply with all relevant requirements of the

directives *2) and standards *3). Technical file at *4)

- see page 3.

The machine is suitable for drilling, without impact,

in metal, wood, plastic and similar materials and for

impact drilling in concrete. stone and similar

materials. Furthermore, the machine is suitable for

thread tapping and screwdriving.

The machine is not suitable for inserting and

removing screws in metal materials.

The user bears sole responsibility for damage

caused by improper use.

Generally accepted accident prevention

regulations and the enclosed safety information

must be observed.

For your own protection and for the

protection of your electrical tool, pay

attention to all parts of the text that are

marked with this symbol!

WARNING – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety warn-

ings and instructions may result in electric shock,

fire and/or serious injury.

Keep all safety instructions and information for

future reference.

Pass on your electrical tool only together with these

documents.

Always wear hearing protection when using

hammer drills. Exposure to noise can cause loss

of hearing.

Use the additional handle supplied with the

tool. Loss of control can lead to injuries.

Hold the power tool by insulated gripping

surfaces when performing an operation where

the cutting accessory may contact hidden

wiring or its own cord. Cutting accessory

contacting a "live" wire may make exposed

metal parts of the power tool "live" and shock the

operator.

Pull the plug out of the plug socket before any

adjustments or servicing are performed.

Ensure that the spot where you wish to work is free

of power cables, gas lines or water pipes

(e.g. using a metal detector).

Avoid inadvertent starts by always unlocking the

switch when the plug is removed from the mains

socket or in case of a power cut.

Keep hands away from the rotating tool!

Remove chips and similar material only with the

machine at standstill.

Caution must be exercised when driving screws into

hard materials (driving screws with metric or

imperial threads into steel)! The screw head may

break or a high reverse torque may build up.

High forces are released if the tool jams or catches.

Always hold the tool firmly, ensure you have good

footing and concentrate when working.

Secure small workpieces. Clamp in a vice for

example.

Reducing dust exposure:

Some of the dust created using this power tool

may contain substances known to cause

cancer, allergic reaction, respiratory disease, birth

defects or other reproductive harm. Some

examples of these substances are: lead (from lead-

based paints), crystalline silica (from bricks cement,

etc.), additives for wood treatment (chromate, wood

preservative), some types of wood (like oak and

beech dust), metals, asbestos.

The risk from exposure to such substances will

depend on how long the user or nearby persons are

being exposed.

Do not let particles enter the body.

To reduce exposure to these substances: work in a

well ventilated area and wear protective equipment,

such as dust masks that are specially designed to

filter out m

icroscopic particles.

Observe the relevant guidelines for your material,

staff, application and place of application (e.g.

occupational health and safety regulations,

disposal).

Collect the generated particles at the source, avoid

deposits in the surrounding area.

Use only suitable accessories. In this way, fewer

particles enter the environment in an uncontrolled

manner.

Use a suitable extraction unit.

Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the

exhaust air stream at yourself or nearby persons

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and

keep it clean using a vacuum cleaner. Sweeping

or blowing stirs up dust.

Vacuum or wash protective clothing. Do not blow,

beat or brush.

See page 2.

1. Conformity Declaration

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Overview

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SBE 610 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info