Bedienungsanleitung Metabo SBE 650 Impuls (Seite 10 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

599618

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISHen

See page 2.

1 Chuck key (for geared chuck) *

2Geared chuck *

3 Futuro Plus keyless chuck *

4Depth stop *

5 Additional handle *

6 Direction switch *

7 Sliding switch for normal drilling/impact drilling *

8 Rocker switch for pulse function *

9 Lock button (continuous operation)

10 Trigger

11 Speed preselection wheel *

* depending on the features / model

Before plugging in, check to see that the

rated mains voltage and mains frequency,

as stated on the rating label, match with your

power supply.

Always install an RCD with a maximum trip

current of 30 mA upstream.

BE 650, SBE 650, SBE 650 Impuls:

Make sure the chuck clamps securely:

After drilling for the first time (clockwise), firmly

tighten the safety screw inside the chuck using

a screwdriver. Caution: left-handed thread!

(see Section 7.9)

6.1 Attaching the Additional Handle

(SB 650, SBE 650, SBE 650 Impuls)

For safety reasons, always use the

additional handle supplied.

Open the clamping ring by turning the additional

handle (5) anticlockwise. Push the additional

handle onto the collar of the machine. Insert the

depth stop (4). Securely tighten the additional

handle at the angle required for the application.

7.1 Adjusting the Depth Stop

(

SB 650, SBE 650, SBE 650 Impuls

)

Loosen the additional handle (5). Set depth stop (4)

to the desired drilling depth and retighten additional

handle.

7.2 Switching On and Off

To start the machine, press the trigger switch (10).

BE 650, SBE 650, SBE 650 Impuls: Press in the

trigger switch to change the speed.

For continuous operation the trigger switch can be

locked using the lock button (9). To stop the

machine, press the trigger switch again.

In continuous operation, the machine

continues running if it is forced out of your

hands. Therefore, always hold the machine

with both hands using the handles provided,

stand in a safe position and concentrate.

7.3 Speed Preselection

(BE 650, SBE 650, SBE 650 Impuls)

Select the (11) maximum speed using the

preselection wheel. See page 4 for recommended

drilling speeds.

7.4 Switching Between Normal Drilling/

Impact Drilling

(SB 650, SBE 650, SBE 650 Impuls)

Select the desired operating mode by pushing the

sliding switch (7).

Drilling

Impact drilling

Work with high speed settings when impact drilling.

Impact drilling and normal drilling only in

a clockwise direction.

7.5 Selecting the Direction of Rotation

(BE 650, SBE 650, SBE 650 Impuls)

Do not activate the direction switch (6)

unless the motor has completely stopped.

Select direction of rotation:

R=Clockwise

L=Anticlockwise

Screw the chuck firmly to the spindle and

tighten the safety screw inside the chuck

using a screwdriver. (Caution: left-handed

thread!)

Otherwise it may come loose during

anticlockwise operation (e.g. when

screwdriving).

7.6 Switching pulse function on and off

(SBE 650 Impuls)

Do not work for long periods with

pulse function switched on!

(The motor can overheat.)

Actuate rocker switch for pulse function (8).

0 = pulse function switched off

= pulse function switched on

7.7 Tool Change With

Futuro Plus Keyless Chuck (3)

Quick-action keyless chuck with metal sleeve:

See illustrations on page 2.

Insert the tool. Hold the retaining ring (a) firmly and

turn the collet (b) towards "GRIP, ZU" with the other

hand until the mechanical resistance which can be

felt is overcome.

Caution! The tool is not yet clamped! Keep

turning the sleeve (it must "click" when turning)

until it cannot be turned any further - only now is the

tool securely clamped.

With a soft tool shank, retightening may be required

after a short drilling period.

Open the chuck:

Hold the retaining ring (a) firmly and turn the collet

(b) towards "AUF, RELEASE" with the other hand.

5. Overview

6. Commissioning

7. Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SBE 650 Impuls Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info