Bedienungsanleitung Metabo SBE 850-2 S (Seite 13 von 68) (Alle Sprachen)

658498

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH en

Original instructions

We declare under our sole responsibility: These

impact drills, identified by type and serial number

*1), comply with all relevant requirements of the

directives *2) and standards *3). Technical file at *4)

ig. P

The machine is suitable for drilling, without impact,

in metal, wood, plastic and similar materials and for

impact drilling in concrete, stone and similar mate-

rials. It is also suitable for thread tapping and for

screwdriving (not SB 850-2).

The user bears sole responsibility for any damage

caused by improper use.

Generally accepted accident prevention regula-

tions and the enclosed safety information must be

observed.

For your own protection and for the

protection of your power tool, pay atten-

tion to all parts of the text that are marked

with this symbol!

WARNING – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety warn-

ings and instructions may result in electric shock,

fire and/or serious injury.

Keep all safety instructions and information for

future reference.

Pass on your power tool only together with these

documents.

Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

Use the additional handle supplied with the

tool. Loss of control can cause personal injury.

Hold the power tool by insulated gripping

surfaces, when performing an operation where

the cutting accessory may contact hidden

wiring or its own cord. Cutting accessory

contacting a "live" wire may make exposed metal

parts of the electrical tool "live" and could give the

operator an electric shock.

Pull the plug out of the plug socket before any

adjustments or servicing are performed.

Avoid inadvertent starts by always unlocking the

switch when the plug is removed from the mains

socket or in case of a power cut.

Ensure that the spot where you wish to work is free

of power cables, gas lines or water pipes (e.g.

using a metal detector).

Smaller workpieces must be secured such that they

are not carried along with the drill bit when drilling

(e.g. by clamping in a vice or on a work bench with

screw clamps).

Keep hands away from the rotating tool! Remove

chips and similar material only with the machine at

standstill.

Metabo S-automatic safety clutch. When the safety

clutch responds, switch off the machine immedi-

ately! If the tool jams or catches, the power supply

to the motor is restricted. Due to the strong force

which can arise, always hold the machine with both

hands using the handles provided, stand securely

and concentrate.

The Metabo S-automatic safety clutch must not be

used for torque control.

Caution with hard screwdriving (driving of screws

with either a metric or an imperial thread into steel)!

The head of the screw may rip off or high restoring

torques may be incurred at the handle.

Reducing dust exposure:

Some of the dust created using this power tool

may contain substances known to cause

cancer, allergic reaction, respiratory disease, birth

defects or other reproductive harm. Some

examples of these substances are: lead (from lead-

based paints), crystalline silica (from bricks cement,

etc.), additives for wood treatment (chromate, wood

preservative), some types of wood (like oak and

beech dust), metals, asbestos.

The risk from exposure to such substances will

depend on how long the user or nearby persons are

being exposed.

Do not let particles enter the body.

To reduce exposure to these substances: work in a

well ventilated area and wear protective equipment,

such as dust masks that are specially designed to

filter out microscopic particles.

Observe the relevant guidelines for your material,

staff, application and place of application (e.g.

occupational health and safety regulations,

disposal).

Collect the generated particles at the source, avoid

deposits in the surrounding area.

Use only suitable accessories. In this way, fewer

particles enter the environment in an uncontrolled

manner.

Use a suitable extraction unit.

Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the

exhaust air stream at yourself or nearby persons

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and

keep it clean using a vacuum cleaner. Sweeping

or blowing stirs up dust.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SBE 850-2 S Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info