Bedienungsanleitung Metabo SSD 18 LT (Seite 10 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595113

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENGLISHen

6.1 Battery pack

Charge the battery pack before use (8).

If performance diminishes, recharge the battery

pack.

The ideal storage temperature is between 10°C and

30°C.

"Li-Power" li-ion battery packs have a capacity and

signal indicator: (11)

- Press the button (10), the LEDs indicate the

charge level.

- If one LED is flashing, the battery pack is almost

flat and must be recharged.

Removal:

Press the battery pack release (9) button and pull

the battery pack (8) forwards

Inserting:

Slide in the battery pack (8) until it engages.

6.2 Setting the direction of rotation, engag-

ing the transporting safety device

(switch-on lock)

Do not actuate the rotation selector switch or

engage the transportation lock (4) unless the

motor has stopped completely!

Actuate the rotation selector switch / Engage the

transportation lock (4)

R = Right rotation set

(insert screws)

L = Left rotation set

(remove screws)

0 = Central position: transportation lock setting

(switch-on lock)

6.3 Switching on and off

Switching on: press the trigger switch (5).

Switching off: release the trigger switch (5).

6.4

Speed

/ Tightening torque

The speed and tightening torque are connected

directly. The lower the speed, the lower the tight-

ening torque.

The tightening torque is influenced in two ways:

1) Preselect maximum tightening torque.

You can select one of three tightening torque

settings by pressing the button (7). The maximum

tightening torques are provided in the table on page

3 (M

MAX

, M

MED

, M

MIN

Button (7) lights up to indicate which setting is

selected.

= Does not light up = max. torque

= Flashing = medium torque

= Continuously lit = min. torque

2) Stepless adjustment of the tightening torque:

The speed and tightening torque can be adjusted

steplessly by pressing the trigger (5) firmly or lightly,

thus adapting to working conditions.

Recommendation: determine the correct setting

by carrying out trial screwdriving.

6.5

Changing screwdriving bit

for

SSD...

Inserting screwdriving bit: Slide locking sleeve

(3) forward and insert screwdriving bit as far as the

stop. Release locking sleeve (3).

Pull on the screwdriver bit to check that it is

correctly seated.

Removing screwdriving bit: Slide locking sleeve

(3) forward and remove screwdriving bit.

Only use screwdriving bits with such plug-in

ends:

The screwdriving bit used must match the

screw.

Damaged screwdriving bits must not be used.

6.6

Changing

SSW... screwdriving bits

Inserting screwdriving bit: Fit the tool on the

square attachment (1) until the limit stop.

Removing screwdriving bit: Pull the tool from the

square attachment (1).

The screwdriving bit used must match the

screw.

Damaged screwdriving bits must not be used.

Mount the machine on the screw, ensuring it is

aligned straight.

The screwdriving process has two elements:

inserting the screw and

tightening the screw with the percussion mech-

anism.

The tightening torque depends on the impact dura-

tion.

With an impact duration of approx. 5 seconds, the

maximum tightening torque has been reached.

The torque curve depends on the type of applica-

tion:

With a hard screwdriving application (screw-

couplings in hard material such as metal), maximum

tightening torque is already reached after a short

impact duration (a).

MAX

MED

MIN

7. Use

9,5 mm (3/8“)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo SSD 18 LT Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info