Bedienungsanleitung Metabo STE 100 Quick (Seite 12 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

665601

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISHen

and ignore tool safety principles. A careless

action can cause severe injury within a fraction of a

second.

3.4 Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the rate

for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and must

be repaired.

c) Disconnect the plug from the power source

and/or remove the battery pack, if detachable,

from the power tool before making any

adjustments, changing accessories, or storing

power tools. Such preventive safety measures

reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools and accessories with

care. Check for misalignment or binding of

moving parts, breakage of parts and any other

condition that may affect the power tool's

operation. If damaged, have the power tool

repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended could

result in a hazardous situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow safe

handling and control of the tool in unexpected

situations.

3.5 Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

Hold the power tool by the insulated gripping

surfaces when performing an operation where

the cutting accessory may contact hidden

wiring or its own cord. Contact with a live lead

may also make metal power tool parts "live" and

lead to an electric shock.

Using clamps or other means, fasten and

secure the workpiece to a stable base. If you

hold the workpiece only with your hand or against

your body, it will remain unstable and this could lead

to a loss of control.

Ensure that the place where you wish to work is free

of power cables, gas lines or water pipes (e.g.

check using a metal detector).

Do not try to saw extremely small workpieces.

When sawing, the footplate must make secure

contact with the workpiece.

When interrupting a cut for any reason, release the

trigger and hold the saw motionless in the material

until the saw blade comes to a complete stop. Never

attempt to remove the saw from the workpiece while

the saw blade is in motion or kickback may occur.

Do not switch the machine on while the saw blade is

touching the workpiece. Let the saw blade reach full

speed before making a cut.

When restarting a saw in the workpiece, centre the

saw blade in the kerf and check that saw teeth are

not engaged into the material. If the saw blade

seizes, it may kickback from the workpiece when

the saw is restarted.

Keep hands well away from the sawing area and the

saw blade. Do not reach underneath the workpiece.

Remove chips and similar material only with the

machine at a standstill.

Pull the plug out of the socket before making any

adjustments, changing tools, carrying out

maintenance or cleaning.

Danger of injury due to the sharp jigsaw blade. After

stopping work, the jigsaw blade may still be hot.

Wear protective gloves.

Reducing dust exposure:

Some of the dust created using this power tool

may contain chemicals known to cause

cancer, allergic reaction, respiratory disease, birth

defects or other reproductive harm. Some

examples of these chemicals are: Lead from lead-

based paints, crystalline silica from bricks and

cement and other masonry products, arsenic and

chromium from chemically-treated lumber, hard

wood like oak or beech, metals, asbestos.

The risk from exposure to such substance will

depends on how long you or bystanders are being

exposed.

Do not let particles enter the body.

To reduce your exposure to these substances: work

in a well ventilated area, and work with approved

safety equipment, such as dust masks that are

specially designed to filter out microscopic

particles.

Observe the relevant guidelines for your material,

staff, application and place of application (e.g.

occupational health and safety regulations,

disposal).

Collect the particles generated at the source, avoid

deposits in the surrounding area.

Use only suitable accessories. In this way, fewer

particles enter the environment in an uncontrolled

manner.

Use a suitable extraction unit.

4. Special Safety Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo STE 100 Quick Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info