Bedienungsanleitung Metabo TBS 18 LTX BL 5000 (Seite 9 von 76) (Alle Sprachen)

816519

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISH en

Only send the battery pack if the housing is intact

and no fluid is leaking. Remove the battery pack

from the machine for sending. Prevent the contacts

from short-circuiting (e.g. by protecting them with

adhesive tape).

4.1 Reducing dust exposure:

WARNING - Some dust created by power

sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

- Lead from lead-based paints,

- crystalline silica from bricks and cement and other

masonry products, and

- arsenic and chromium from chemically treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well-

ventilated area, and work with approved safety

equipment, such as those dust masks that are

specially designed to filter out microscopic

particles.

This also applies to dust from other materials, such

as some timber types (like oak or beech dust),

metals, asbestos. Other known diseases are e.g.

allergic reactions, respiratory diseases. Do not let

dust enter the body.

Observe the relevant guidelines and national

regulations for your material, staff, application and

place of application (e.g. occupational health and

safety regulations, disposal).

Collect the particles generated at the source, avoid

deposits in the surrounding area.

Use suitable accessories for special work. In this

way, fewer particles enter the environment in an

uncontrolled manner.

Use a suitable extraction unit.

Reduce dust exposure with the following measures:

- do not direct the escaping particles and the

exhaust air stream towards yourself or nearby

persons or towards dust deposits,

- use an extraction unit and/or an air purifier,

- ensure good ventilation of the workplace and keep

it clean using a vacuum cleaner. Sweeping or

blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow,

beat or brush protective gear.

See page 2.

1 Rotation selector switch

2Handle

3Trigger

4 Battery pack release button

5Belt hook *

6 Battery pack *

7 Capacity indicator button *

8 Capacity and signal indicator *

9 Setting wheel (select operating mode)

10 LED light

11 Depth stop

12 Screwdriver bit*

13 Bit holder

14 Spindle

15 Closure sleeve

16 Stop sleeve

17 Setting sleeve

18 Union sleeve

* depending on the model / features

6.1 Battery pack

Charge the battery pack (6) before use.

Recharge the battery pack if performance

diminishes.

Instructions on charging the battery pack can be

found in the operating instructions of the Metabo

charger.

In case of Li-Ion battery packs with capacity and

signal display (8) (equipment-specific):

- Press the button (7); the LEDs indicate the charge

(8) level.

- The battery pack is almost empty and must be

recharged if one LED is flashing.

Removing and inserting the battery pack

Removal: press the battery pack release button (4)

and pull the battery pack (6) forwards.

To insert: Slide the battery pack (6) in until it

engages.

6.2 Installation of belt hook

The belt hook (5) may be screwed into place on the

left or the right (see illustration, page 2).

7.1 Setting the direction of rotation,

engaging the transporting safety device

(switch-on lock)

Only activate the rotation selector switch (1)

when the motor has completely stopped.

See page 2:

R= Clockwise setting

L= Anti-clockwise setting

0= Centre position: with the transporting safety

device engaged (switch-on lock)

7.2 Selection operating mode, switch on / off

Set the required operating mode on the setting

wheel (9).

Note: When the motor is running, the spindle does

not start until the spindle is pushed in.

Manual mode

Switch on: press the trigger switch (3). Press

in the trigger to increase the rotational speed.

To switch off release the trigger switch.

Automatic mode

The tool starts automatically when the

5. Overview

6. Initial Operation

7. Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo TBS 18 LTX BL 5000 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info