Bedienungsanleitung Metabo W 18 LTX 125 QUICK (Seite 15 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595436

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

ENGLISH en

3Support flange

4Spindle

5 Spindle locking button

6Sliding

on/off switch *

7 Electronic signal indicator*

8 Battery pack release button

9 Capacity indicator button

10 Capacity and signal indicator

11 Battery pack

12 Dust filter

13 Switch-on lock *

14 Trigger *

15 Additional handle / Additional handle with

vibration damping *

16 Safety cover

17 Clamping nut *

18 2-hole spanner *

19 Lever for safety guard attachment

* depending on equipment/not in scope of delivery

6.1 Attaching the additional handle

Always work with the additional handle

attached (15)! Attach the additional handle on

the left or right of the machine and secure.

6.2 Install safety guard

For safety reasons, always use the safety

guard provided for the respective wheel! See

also chapter

11.

Safety guard for grinding

Designed for work with roughing wheels, flap

sanding pads, diamond cut-off wheels.

See illustration E on page 2.

-Pull on the lever (19). Place the safety guard (16)

in the position indicated.

- Release the lever and turn the safety guard until

the lever engages.

-Pull on the (19)lever and turn the safety guard until

the closed section is facing the operator.

- Make sure that the guard is seated securely: the

lever must engage and you should not be able to

turn the safety guard.

Use only accessories that

are covered by at least

3.4 mm by the safety guard.

6.3 Dust filter

See illustration A on page 2.

Always fit the dust filter if the surroundings are

heavily polluted (12).

The machine heats up faster when the dust

filter is fitted (12). It is protected by the

electronics system from overheating (see

chapter

10.).

To fit:

Attach the dust filter (12) as shown.

To remove:

Holding the dust filter at the edges, raise it slightly

(12) and then pull it downwards and remove.

6.4 Rotating battery pack

See illustration B on page 2.

The rear section of the machine can be rotated 270°

in three stages, thus allowing the machine's shape

to be adapted to the working conditions. Only

operate the machine when it is in an engaged

position.

6.5 Battery pack

Charge the battery pack before use (11).

If performance diminishes, recharge the battery

pack.

The ideal storage temperature is between 10°C and

30°C.

"Li-Power" li-ion battery packs have a capacity

and signal indicator: (10)

- Press the button (9), the LEDs indicate the charge

level.

- If one LED is flashing, the battery pack is almost

flat and must be recharged.

6.6 Removing and inserting the battery pack

Removal:

Press the battery pack release (8) button and pull

the battery pack (11) forwards.

Inserting:

Slide in the battery pack (11) until it engages.

Before carrying out any modifications: remove

the battery pack from the machine. The

machine must be switched off and the spindle at a

standstill.

For reasons of safety, attach the parting guard

before performing parting work (see chapter

11. Accessories).

7.1 Locking the spindle

-Press in the spindle locking button (5) and turn the

spindle

(4) by hand until you feel the spindle locking

button engage.

7.2 Placing the grinding wheel in position

See illustration C on page 2.

- Fit the support flange (3) on the spindle. The

flange should not turn on the spindle when

properly attached.

- Place the grinding wheel on the support flange (3).

The grinding wheel must lay flat on the supporting

flange. The metal flange on the parting grinder

disc must lay flat on the support flange.

Note: The support flange (3) is secured to prevent it

from falling off. To remove: use some force if

necessary.

6. Initial Operation

7. Attaching the grinding wheel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo W 18 LTX 125 QUICK Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info