Bedienungsanleitung Metabo WB 11-125 Quick (Seite 15 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

665553

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH en

WB..., WBA..., WEBA...: In continuous opera-

tion, the machine continues running if it is

forced out of your hands. Therefore, always hold the

machine with both hands using the handles

provided, stand in a safe position and concentrate.

Machines with slide switch:

See illustration A on page 2.

Switching on: Push the slide switch (5) forward.

For continuous activation, now tilt down-

wards until it engages.

Switching off: Press the rear end of the slide

switch (5) and release.

Machines with "Protect safety switch" (with

dead-man function):

See illustration B on page 2.

Switching on: Slide safety switch (7) in the direc-

tion of the arrow and then press the safety

switch (7).

Switching off: Release the safety switch (7).

8.2 Working instructions

Grinding and sanding operations:

Press down the machine evenly on the surface and

move back and forth so that the surface of the work-

piece does not become too hot.

Roughing: position the machine at an angle of 30° -

40° for the best working results.

Separating:

Always work against the run of the disc

(see illustration). Otherwise there is

the danger of the machine kicking

back from the cut out of control. Guide

the machine evenly at a speed suit-

able for the material being processed. Do not tilt,

apply excessive force or sway from side to side.

Wire brushing:

Press down the machine evenly.

Motor cleaning: blow compressed air through the

rear ventilation slots of the machine regularly,

frequently and thoroughly. Here, the machine must

be held firmly.

WEBA..., WEPBA...:

The electronic signal display (6) lights up

and the load speed decreases. The coil

temperature is too high! Run the machine in

idling until the electronics signal indicator switches

off.

WEBA..., WEPBA..:

The electronic signal display (6) flashes

and the machine does not start. The restart

protection is active. If the mains plug is

inserted with the machine switched on, or if the

current supply is restored following an interruption,

the machine does not start up. Switch the machine

off and on again.

Use only genuine Metabo accessories.

See page 4.

Use only accessories which fulfil the requirements

and specifications listed in these operating instruc-

tions.

A Safety guard for cut-off grinding

Designed for work with cut-off wheels, diamond cut-

off wheels.

Install as described under "Safety guard for

grinding" (chapter 6.2).

B Cut-off grinding safety guard with guide

carriage

Designed for cutting through stone slabs with

diamond cut-off wheels.

Mount on machine and secure with screw. With

nozzle for extracting stone dust using a suitable

extractor.

C Hand guard for sanding and wire brushing

operations

Designed for work with support plates, sanding

pads, wire brushes.

Install hand guard under the additional side-

mounted handle.

For a complete range of accessories, see

www.metabo.com or the accessories catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

The sanding dust generated may contain

hazardous materials: do not dispose of with the

household waste, but at a special collection point

for hazardous waste.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Directive 2002/

96/EC on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately and

handed in for environmentally compatible recycling.

Explanation of details on page 3. Subject to

changes serving technical progress.

max

= max. diameter of accessory

9. Cleaning

10. Troubleshooting

11. Accessories

12. Repairs

13. Environmental Protection

14. Technical Specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo WB 11-125 Quick Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info