572206
7
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
MI 3309 BT DeltaGT General description
7
1.1 Warnings
In order to reach a high level of operator safety while carrying out various measurements
using the instrument, as well as to keep the test equipment undamaged, it is necessary to
consider the following general warnings:
Warning on the instrument means »Read the Instruction manual with
special care to safety operation«. The symbol requires an action!
Read this instruction manual carefully, otherwise use of the instrument may
be dangerous for the operator, for the instrument or for the equipment under
test!
If the test equipment is used in manner not specified in this instruction
manual the protection provided by the equipment may be impaired!
Do not use the instrument and accessories if any damage is noticed!
Do not touch any test leads/terminals while the appliance is connected to the
MI 3309 BT DeltaGT.
Consider all generally known precautions in order to avoid risk of electric
shock while dealing with hazardous voltages!
Use only correctly earthed mains outlets to supply the instrument!
The mains supply voltage has to be higher than 80 V a.c. otherwise the
internal power supply could be damaged.
Use only standard or optional test accessories, supplied by your distributor!
Instrument servicing and adjustment have to be carried out by competent
authorized personnel!
Hazardous voltages can exist inside the instrument. Disconnect all test leads,
remove the power supply cable and switch off the instrument before opening
the battery compartment.
Instrument contains rechargeable NiCd or NiMh battery cells. The cells
should only be replaced with the same type as defined on the battery
placement label or in this manual. Do not use alkaline battery cells.
If a test code with an earth continuity test current higher than 200 mA is
selected (manually, with barcode scanner or with RFID reader/writer) the
DeltaGT instrument will automatically perform the Earth continuity test with a
200 mA test current. Other test parameters remain unchanged. The operator
must be competent to decide if performing the test with a 200 mA current is
acceptable!
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Metrel DeltaGT MI 3309 BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Metrel DeltaGT MI 3309 BT

Metrel DeltaGT MI 3309 BT Bedienungsanleitung - Deutsch - 97 seiten

Metrel DeltaGT MI 3309 BT Bedienungsanleitung - Holländisch - 25 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info