776310
7
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
MD 9010 General Purpose Auto – Check Digital Multimeter Operation
7
” indicates a complete circuit. In noisy environments, it is helpful to “see” continuity
measurements.
Electric Field EF-Detection
From AutoCheckTM with “Auto” being displayed, press the SELECT button momentarily
2 times to select EF-Detection feature. The meter displays “EF” when it is ready. Signal
strength is indicated as a series of bar-graph segments on the display and variable
beep tones.
Non-Contact EF-Detection: An antenna is located at the top left corner of the meter,
which detects electric field surrounds current-carrying conductors. It is ideal for tracing
live wiring connections, locating wiring breakage and to distinguish between live or earth
connections.
Probe-Contact EF-Detection: For more precise indication of live wires, such as
distinguishing between live and ground sockets, use the Red (+) test probe for direct
contact measurements.
V and of AutoCheckTM In Manual Selection
From AutoCheckTM with “Auto” being displayed, press the SELECT button momentarily
3 times to select ACV, 4 times to select DCV and 5 times to select Resistance ()
functions of AutoCheckTM. Such selected function remains auto-ranging.
-Frequency And Capacitance
From AutoCheckTM with “Auto” being displayed, press the SELECT button momentarily
6 times to select Frequency (Hz), 7 times to select Capacitance (F) functions and 8
times to return to AutoCheckTM mode.
Note:
*Unlike the Line Level Hz Frequency function as stated, this (Common) Hz Frequency
function is set only at the highest input sensitivity mainly for measuring small electronic
signals of below 20VAC rm
Other Functions
DCV, ACV & Line-Level Hz functions
Rotate the rotary selector to the V position selects common impedance (Hi-Z) voltage
measurements. DCV is the default function. Press SELECT button momentarily to
select ACV. The AC annunciator “ ” turns on. Press momentarily again to activate the
Line-Level Hz function.
Note:
*Line-Level Hz input sensitivity varies automatically with ACV range selected when
Line-Level Hz is selected. AC 6V range has the highest and AC 600V range has the
lowest sensitivity. Measuring the signal in ACV function WHILE selecting Line-Level Hz
function in that ACV range automatically sets the most appropriate sensitivity for higher
voltage applications. This can avoid electrical noises as in 110/220V line voltage
applications for example. If the reading shows zero due to insufficient signal levels,
select Line-Level Hz function BEFORE making measurements (at AC 6V range) will set
the highest sensitivity.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Metrel MD 9010 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info