10
ADDING CHANNELS
Manual Search: searching for a specific satellite channel
- Press MENU / Installation / TP Scan.
- Go to Satellite and press OK to display the list of satellites.
- Using the 56 keys, select the satellite that emitts the channels you wish to view and press
OK to confirm.
- Go to TP Index, press OK to view the list of the frequencies.
- Using the 56 keys select the frequency of the channel you wish to view (if the desired fre-
quency is not diplayed, it will need to be added to the list, as explained in paragraph C).
- The Symbol Rate and Polarity functions will be automatically modified (in case this does
not happen it is possible to enter the values manually).
- Ensure that the quality and signal intensity levels are superior to 50% (grey bar = no signal:
this means that the frequency or LNB parametres are not correct or that the antenna is not
pointing to the right satellite).
- Go to Scan mode and select FREE using the 34keys.
- Use the 6 key to go to Search and press OK.
- The TP Scan window is displayed along with the Find Channel. The screen goes back to
TP Scan. Press EXIT twice to leave the menu.
Automatic Channel Search: searching for all channels from one satellite
- Press MENU / Installation / Auto scan.
- Go to Satellite and press OK to display the list of satellites.
- Using the 56 , keys select the satellite that emitts the channels you wish to view to start an
automatic search. Press
OK
to confirm.
- Go to Scan mode and select FREE using the 34keys.
- Use the
6 key to go to
Search
and press
OK
.
The Auto Search window is displayed along with the Find Channel. The screen goes back to Auto
Search. Press EXIT twice to leave the menu.
Adding / Cancelling / Modifying a transponder (see index 5)
Modifying a transponder:
- Press MENU / Installation / TP Scan.
- Select the satellite on the first line using the 56keys.
- Go to TP List and select the transponder you wish to modify.
- Change the value: frequency, rate symbol, polarity etc.
- Press EXIT to save the data you have entered.
Cancelling a transponder
- Press MENU / Installation / TP Scan.
- Select the transponder you wish to cancel using the 56 keys and press the ‘2’ key
of your remote.
- Press EXIT to save the data you have entered.
5
A
B
C
