Bedienungsanleitung Metronic T2 HD zapbox (Seite 15 von 21) (Englisch)

494990

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

English - 14 -

• Audio: Sets the preferred audio language.

• Subtitle: Sets the subtitle language. Selected language

will be seen in subtitles.

• Guide : Sets guide language.

Current (*)

(*) These settings can only be changed if the broadcaster

supports them. Otherwise, settings will not be available

for change.

• Audio: Changes the audio language for the current

channel.

• Subtitle: Sets the subtitle language for the current

channel.

IP Settings

• You can conﬁ gure your receiver’s IP settings by using

this menu screen.

• Press YELLOW button to set static IP settings.

• Use BLUE button to conﬁ gure dynamic IP settings.

• You can press RED button to disable IP conﬁ guration.

• In order for the ethernet host to work correctly with

your internet connection it needs to have a unique IP

address. In most cases all of the parameters can be

provided by the DHCP server in their router. In this

case you should use the “Dynamic” option.

• In the unlikely event that you do not have a DHCP

server in your router or if you prefer to assign your

own IP address, then the “Static” option can be

used. You will need to enter a unique IP address

along with the default gateway and DNS server.

In most domestic networks the default gateway

and DNS server will both be the IP address of the

router.

Installation

• Installation menu will help you to retune your set-top-

box in order to store new services or stations.

• Select Installation from Setup menu by using “

”

or “

” buttons and press OK to continue.

• Installation menu includes the following items:

Automatic Channel Scan

• Select Automatic Channel Scan by using “ ” or “

” buttons and press OK button.

• Then the following message will be displayed on

the screen:

• Highlight Yes or No by using “ ” or “ ” buttons and

press OK button to conﬁrm.

• If Yes is selected, automatic search starts.

• Selecting No cancels automatic search.

• After the scanning is completed, your set-top-box

will store all the available channels.

Manual Channel Scan

• This feature can be used for direct broadcast entry.

• Select Manual Channel Scan by using “

” or “ ”

button and press OK button.

• In manual channel scan, the number of the multiplex is

entered manually and only that multiplex is searched for

the channels.

• For each valid channel number, signal level and signal quality

are shown on the screen.

• In both manual and auto search, any existing channel

in the database is not re-stored to avoid duplicates of

that channel.

First Time Installation

• If you want to load default settings of your set-top-

box, you can perform ﬁ rst time installation.

• Select First Time Installation by using “

” or “ ”

buttons and press OK button.

• The following message, asking you whether or not to

delete all channels and settings, will be displayed.

• Highlight No by using “ ” or “ ” button to cancel

installation.

• Highlight Yes by using “

” or “ ” button and press

OK button to start ﬁ rst time installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metronic T2 HD zapbox Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info