17
info@metronic.com
You can access the adjusting options for the TV signal in Menu / Setup /
TV Setup.
• On
Aspect Ratio, select 4:3 or 16:9 depending on your screen format.
• If you have a 4:3 screen, you can choose on widescreen the way a 16:9
image will appear on your TV.
- The CenterCutout mode increases the image size without
distorting it to fill the whole screen.
- The FullFrame mode resizes the image horizontally in a 4:3 screen.
The image is therefore distorted.
- The Letterbox mode shows a full image, with black strips at the top
and bottom of the screen.
• On Standard, choose between RGB and CVBS. The CVBS mode
(composite) gives an image of lower quality than the RGB, but is compatible
with all TVs.
IMPORTANT ! If you have a 4:3 screen, do not adjust the Aspect Ratio to 16:9 !
Apart from TV channels, terrestrial digital also allows you to receive
radio channels.
As soon as you press the TV/RAD key, you are entering the radio mode.
From then on, the CH+ and CH- keys will allow you to move from one
radio channel to another one. To go back to the TV mode, press the TV/RAD
key once more.
9 - Radios
10 - Channel Search
You should follow this process when you have lost a channel or if new channels
are emitted by operators.
• Go to Menu / Setup / Service Setup / xxxx / Fullscan Replace Existing
Services.
The receiver will search for new channels and add them.
8 - Adjusting the TV signal
