Bedienungsanleitung Mettler-Toledo Tiger II - RN10-CNRS (Seite 8 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

659294

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

METTLER TOLEDO

8 Tiger II

PLU (Price Look Up) Function

The PLU function can store 100 PLU. They can be used for frequently sold goods, where the data (prices or/and

tare* depending on the setting in factory) can be looked up by simply entering the PLU number. The default is

price only.

*Preset tare is not permitted in EU countries.

☞ Store a PLU (unit price or/and tare)

Enter the required unit price or/and tare.

PLU

Press and hold the PLU key until a long beep is heard. In the weight display appears: “PLu”.

Enter the PLU number (between 1 and 100) and wait for approx. 2 seconds, until the scale beeps twice.

☞ Recall a PLU (automatic search function off, refer to SET-UP, step 5)

Input the required PLU number, then press the PLU key. The stored data will appear in the display.

☞ Recall a PLU (automatic search function on, refer to SET-UP, step 5)

Input the required PLU number, the stored data will appear in the display.

Notice: To call PLU 12, press 1 and 2 within 2 seconds, if the 2 is not pressed within 2 seconds, the PLU

number 1 will be called up.

Preset Key Function

The scale has 16 preset keys, which can store another 16 or 32 PLU and recall theses PLU directly.

☞

Store a PLU in a preset key

Enter the required unit price or/and tare.

~ Press and hold the required M-key until a long beep is heared, then two continous beeps will be heard to

indicate the data have been stored.

☞ Recall a PLU in a preset key

Press the required M-key, the data stored will appear in the display.

When double click function is on, referring to SET-UP, step 6, one preset key can store and recall 2 PLU. The

way to store and recall the first PLU is same as the operation in “Store a PLU in a preset key” and “Recall a PLU

in a preset key”.

☞ Store the second PLU in a preset key (double click function is on, refer to SET-UP, step 6)

Enter the required unit price or/and tare.

Press and hold the required M-key until a long beep is heard, then press this M-key again and release it within

1 second, “L 2” will appear to show this data is stored by double-clicking M-key, and two beeps will finish the

storage.

☞

Recall the second PLU in a Preset (double click function is on, refer to SET-UP, step 6)

Double click the required M-key within 1 second, the “L 2” will be shown in the weight display for 1 second,

then the data stored by double-clicking this M-key will appear in the display.

Fix Key Function

Normally the tare and unit price will be cleared after each weighing, with key-FIX the tare and unit price can be

fixed.

Press the key-FIX and cursor FIX will be lit, the tare and unit price will remain until new value is entered.

Press the key-FIX again to switch off the fix function.

M1 M16

FIX

ON/OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mettler-Toledo Tiger II - RN10-CNRS Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info