97
k
5.4.6 26AF-2 FUJIFILM
The remote slave flash mode is not supported by
FUJIFILM cameras at the time of printing this user guide.
The 26AF-2 automatically switches to the TTL mode of
operation after around 1-2 seconds after pressing the
SLAVE button
.
When remote slave mode is supported by FUJIFILM
cameras, the 26AF-2 can be used as a slave flash unit
after a software update. Afterwards, wireless remote
control of one or more slave flash units by a master flash
unit (depending on the camera type) on the camera or
by the camera’s master is possible.
For slave flash unit 26AF-2 , slave group A as well as all
remote channels 1, 2, 3 and 4 are always set.
Depending on the camera model, the camera’s internal
flash unit can also function as a master or controller
flash unit. Please consult the respective camera opera-
ting instructions for further tips on setting the master or
controller flash unit.
Remote slave flash mode settings
• Switch on the flash unit with the ON/OFF button
.
• Press the SLAVE button
on the flash unit to set the
Remote-Slave mode of operation. The setting is imme-
diately effective and automatically saved.
Testing remote flash mode
• Place the slave flash units in the desired positions for
the shot. Use flash unit mounting foot to set up the
slave flash unit.
Assembly / disassembly of the stand
• Press and Locking button
and slide the flash unit,
together with the connection base, into the moun-
ting foot as far as possible.
• Press and Locking button
and remove the flash
unit with the connection base from the mounting
foot.
• Wait for the flash readiness of all connected flash
units. Once the slave flash units have achieved flash
readiness, the STATUS LED
lights up in green.
• Press the manual firing button on the master or
controller flash unit to fire a test flash. The slave flash
units respond with a test flash, if supported by the
camera.
If a slave flash unit does not issue a test flash, correct
the position of the slave flash unit to enable the slave
sensor
to receive the light sent by the master/con-
troller flash unit.
