154
k
Some cameras do not support the BL func-
tion in combination with SPOT exposure
metering! This flash mode "BL" will then eit-
her be automatically cancelled or cannot be
activated.
In these cases, the normal TTL flash mode
will be set.
7.3 Manual flash mode
In the manual flash mode M , the flash unit
emits the full uncontrolled amount of light if
no partial light output has been selected. The
specific photographic situation can be taken
into account by adjusting the aperture set-
ting or by selecting a suitable manual partial
light setting.
The setting area ranges from P 1/1 to
P 1/128 in mode and P1/1 - P1/32 in
mode. The display shows the distance
at which the subject is correctly lit (see 5.2).
TTL
M
M HSS
Setting the mode of operation
• Switch on the flash unit with the
ባ
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last .
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the touch
display.
• Set a suitable mode of operation on the
camera, e.g. M.
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
Various cameras support manual flash mode
M only in the camera's M mode (manual).
In other camera models, an error message
appears in the display and the release is
locked.
M
M
+
TTL
BL
INFO
EV
0,3-3,5 m
ZOOM 35
F4.0
m
m
TTL
BL
M
GN
TTL
INFO
EV
0,7-7,9 m
ZOOM 35
F4.0
m
m
M
INFO 1/1
7,9 m
ZOOM 35
F4.0
m
m
