Bedienungsanleitung Metz MECABLITZ 54 AF-1 Minolta (Seite 61 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

517350

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

5.4 Information in the LC display

The cameras transmit the ISO sensitivity, the focal length (mm), f-stop and

exposure correction to the flash unit which automatically adapts its settings

accordingly. It calculates the maximum flash range on the basis of its guide

number and the transmitted values. Flash mode, maximum flash range, aper-

ture and zoom reflector position are all indicated in the LC display of the

flash unit.

If the flash unit operates without having received data from the camera (e.g.

when the camera is switched off), then only the selected flash mode, the

reflector position and „M.Zoom“ are indicated. Aperture and maximum flash

range are only displayed if the camera transmits the corresponding data to

the flash unit.

Some cameras suppress the maximum flash range indication on the LC dis-

play of the flash unit in the event of high ISO values (e.g. ISO 6400) or

flash exposure corrections.The aperture is not indicated in the LC display of

the flash unit when the digital cameras Dimage 5 and Dimage7, 7i are

used.

5.4.1 Maximum flash range indication in TTL flash mode

The LC display of the flash unit indicates the maximum flash range. The indi-

cated value relates to a factor of 25 % of light reflection by the subject, which

applies to most photographic situations. Pronounced deviations from this re-

flection factor, e.g. highly reflective or poorly reflecting objects, can influence

the maximum flash range of the flash unit.

Always observe the maximum flash range indicated by the LC display of the

flash unit. The subject should be within approx. 40 % and 70 % of the indi-

cated value. This gives the electronic circuit sufficient scope for compensa-

tion. To avoid overexposure, the minimum flash-to-subject distance should not

be less than 10 % of the indicated value. Adaptation to the given photogra-

phic situation is possible by changing the aperture setting on the lens.

☞

5.4.2 Maximum flash range indication in the manual flash modes

M and MLo

The LC display of the flash unit indicates the distance to be maintained for

correct exposure of the subject. Adaptation to the given photographic situa-

tion is achieved by changing the aperture setting on the lens and selecting

either „M“ for full light output or „MLo“ for partial light output (see 4.4).

5.4.3 Exceeding the display range

The flash unit can indicate a maximum range of 199 m or 199 ft. This dis-

play range can be exceeded in the event of high ISO values (e.g. ISO 6400)

and large aperture openings. An arrow or triangle after the distance value

indicates that the display range has been exceeded.

5.4.4 Blanking out the maximum flash range display

The LC display of the flash unit does not indicate any distances when the

reflector head is swivelled up or down out of its normal position!

5.4.5 Meter-Feet changeover (m - ft)

The maximum flash range indicated by the LC display of the flash unit can be

either in meter (m) or feet (ft). To change between the two, proceed in the fol-

lowing manner:

• Turn off the flash unit by its main switch.

• Keep the „Select“ key combination depressed (= „Mode“ key + „Zoom“ key).

• Turn on the flash unit by its main switch.

• Release the „Select“ key combination (= „Mode“ key + „Zoom“ key).

• The flash range indication changes from m to ft or from ft to m.

5.5 LC display illumination

Keep the „Mode“ or „Zoom“ key depressed for approx. 10 sec. to activate

the LC display illuminationof the flash unit. The LC display illumination is

switched off when a flash is triggered.

The settings on the flash unit are not changed when the above keys

are pressed for the first time!

☞

54 AF-1 M 03.08.2004 10:53 Uhr Seite 61

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metz MECABLITZ 54 AF-1 Minolta Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info