Bedienungsanleitung Metz MECABLITZ 54 AF-1 Minolta (Seite 62 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

517350

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

If the shot was correctly exposed in TTL flash mode, then the LC display illu-

mination will be activated during „o.k.“ display (see 4.1.3).

5.6 Motor zoom reflector

The reflector of the flash unit provides full light coverage for lenses of 24 mm

focal length and longer (35 mm format).

5.6.1 „Auto-Zoom“

If the flash unit is operated with a camera that transmits the focal length data

to the flash unit, then the zoom reflector position will be automatically adapted

to the focal length of the lens. When the flash unit is turned on, the LC display

will indicate „Auto Zoom“ and the current reflector position.

Automatic reflector adaptation commences with lenses of 24 mm focal

length. If a focal length shorter than 24 mm is used, then the „24“ indicated

on the LC display will start to flash as an indication that the flash unit cannot

fully illuminate the shot right out to the image corners.

A wide-angle diffuser (optional extra, see section 7) can be used for

lenses as of 20 mm focal length. In cases where the motor zoom re-

flector of the flash unit is automatically controlled by the digital ca-

meras Dimage 5, 7, or 7i, the focal length position of the reflector can

deviate from the focal length set on the lens. This is because the ca-

mera positions the reflector so that the flash coverage is larger than

necessary in order to guarantee a complete illumination of the picture

(comparable to the extended zoom mode described in section 5.6.3).

5.6.2 Manual zoom mode „M.Zoom“

The position of the zoom reflector can also be manually changed, for in-

stance to achieve specific lighting effects (e.g. hot-spot, etc.). Repeated de-

pression of the „Zoom“ key on the flash unit will successively select the fol-

lowing reflector positions:

24 mm - 28 mm - 35 mm - 50 mm - 70 mm - 85 mm - 105 mm

The LC display of the flash unit indicates „M.Zoom“ for manual zoom setting

and the current zoom position (mm). The setting becomes instantly effective.

The display is switched back to its normal state after approx. 5 sec.

☞

If manual adjustment of the zoom reflector results in a setting in which

the shot will not be fully illuminated right out to the image corners,

then the reflector position indicated on the display of the flash unit will

start to flash as a warning.

Example:

• You are using a lens focal length of 50 mm.

• A reflector position of 70 mm has been manually adjusted on the flash unit

(„M.Zoom“ is displayed).

„70 mm“ for zoom position will start to flash on the LC display of the flash

unit because the shot will not be fully illuminated right out to the image cor-

ners.

Returning to „Auto-Zoom“

There are various ways to return to „Auto Zoom“:

• Continue pressing the „Zoom“ key on the flash unit until „Auto Zoom“ ap-

pears on the display. The setting becomes instantly effective. The LC display

is switched back to its normal state after approx. 5 sec.

Or:

• Briefly turn off the flash unit by its main switch. When the flash unit is

turned on again the display of the flash unit will indicate „Auto Zoom“.

5.6.3 Extended zoom mode

The extended zoom mode (Ex) reduces the focal length setting of the flash

unit by one step compared with the focal length of the camera’s lens! The

resulting wider light coverage inside rooms provides additional stray light

(reflections) to achieve softer flash illumination.

Example of extended zoom mode:

The focal length set on the camera lens is 35 mm. The extended zoom mode

sets a 28 mm reflector position on the flash unit even though 35 mm conti-

nues to be indicated on the LC display!

☞

54 AF-1 M 03.08.2004 10:53 Uhr Seite 62

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metz MECABLITZ 54 AF-1 Minolta Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info