658310
143
Zoom out
Zoom in
Vorherige Seite
1/272
Nächste Seite
143
5 Information in Display
The cameras transmit the settings for ISO, lens focal
length (mm) and aperture to the flash unit.
It calculates the maximum flash range from the set-
tings and their guide number.
Flash mode and range are shown on the flash unit’s
display.
If the flash unit is operated without receiving data
from the camera, then the values set on the flash
unit will be shown.
5.1 Display of the flash mode
The current flash mode is shown in the display.
Depending on the type of camera, different displays
are available for the selected TTL flash mode
(z.B. and ; see 7.2, 7.3) and the manu-
al flash mode M (see 7.4).
5.2 Range display
When using cameras and a lens with CPU, the range
is indicated in the display.
For this a data exchange must have occurred bet-
ween the camera and flash unit, for example by tap-
ping the shutter release. The range can be display-
ed either in metres (m) or feet (ft) - see 14.2).
The flash range is not displayed when . . .
- when the reflector head is tilted out of its normal
position (upwards or sideways).
- if the flash unit is working in REMOTE MASTER,
REMOTE SLAVE , SERVO or AUTO mode.
TTL BL
TTL
5.2.1 Range display in i TTL-/
i TTLBL- flash modes
In the TTL flash modes , ,
and ; see 7) the value for the the maximum
range of the flash unit is displayed.
The value indicated relates to subjects with a reflec-
tion factor of 25%, which applies to most photogra-
phic situations.
Strong deviations from this reflection factor, as in
the case of highly reflective or poorly reflective sub-
jects, may affect the flash range of the flash unit.
The subject should be in the range of 40% to 70%
of the maximum range. This will give the electronics
sufficient scope for compensation.
To avoid overexposure, at least 10% of the maxi-
mum range should be maintained as the minimum
distance from the subject of the photo.
Adjustment to the photographic situation at hand can
be achieved by, for example, changing the aperture of
the setting on the lens.
TTL BL FPTTL BLTTL
TTL FP
+
EV
7,9m
TTL
k
143

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Metz mecablitz M400 - Nikon wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info