157
10.1.5 Remote channel settings
A remote channel can not be selected when a group
has been set on the master.
There are four independent remote channels to use
so that multiple remote systems in the same room
do not interfere with one another. Master and Slave
flash units belonging to the same remote system
must be set to the same remote channel.
• Press the button and the menu
will appear.
• Use the buttons to select .
• Press the
° button and open the menu.
• Use the buttons to set the desired channel..
• Press the
° button and confirm the selected
setting.
The setting will take effect immediately.
The channel setting can be checked by pressing the
sensor button
° .
OPT.
CHANNEL
10.1.6 Set the Group, Flash Mode and Partial Light
Output (P) or Exposure Compensation (EV)
for the Slave Flash Unit on the Master
• Press the button to open the or or
group.
• Press the button and open the
operating mode.
• Use the buttons to set the desired flash ope-
rating mode (e.g. ) .
• Press the
° button and confirm the selected
setting.
The selected setting is adopted.
PGR. B
PGR. A
PGR. C
MODE
M
