146
k
Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears. Thereafter, the flash
unit always switches on with the mode of operati-
on that was used last.
• Press the button and the drop-down
menu will appear.
• Use the buttons to select the opera-
ting mode.
• Press the
° button and confirm the selected
operating mode.
• Set a suitable mode of operation on the camera,
e.g. P, S, A etc.
• Tap the shutter release to transfer data between
the flash unit and the camera.
7.3 Manual flash mode
In the manual flash mode M, the flash unit emits
the full uncontrolled amount of light if no partial
light output has been selected. The specific photo-
graphic situation can be taken into account by adju-
sting the aperture setting or by selecting a suitable
manual partial light setting.
TTL
The setting area ranges from P 1/1 to P1/256 in
mode and P1/1 - P1/32 in mode.
The display shows the distance at which the subject
is correctly lit (see 5.2).
Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears.
Thereafter, the flash unit always switches on with
the mode of operation that was used last .
• Press the button and the drop-down
menu will appear.
• Use the buttons to select the operating
mode.
• Press the
° button and confirm the selected
operating mode.
• Tap the shutter release to transfer data between
the flash unit and the camera.
M HSSM
M
P 1/1
7.9m
MODE
TTL HSS
M
MHSS
M
EV
7,9m
MODE
AUTO
TTL
TTL HSS
TTL
