158
k
Activating ratio
• Press the button and the menu
will appear.
• Use the buttons to select .
• Press the
° button and confirm the selected
setting.
• Using the keys, select master or sla-
ve group or the slave group .
• Press the
° button and confirm the selected
setting.
• Use the keys to select the exposure share .
When doing so, the settings - / 1 / 2 / 4 / 8 /16 are
possible for the exposure share.
In the setting " – ", the corresponding device will
not participate in the flash exposure of the photo-
graph.
In the example, the exposure share 1 was selected
for the previously selected master CTRL.
OPT.
RATIO
CTRL
RMT RMT2
In the following are the settings for the slave groups
RMT and RMT2 as well as for the master CTRL after
this example.
In the adjacent example, the exposure share for the
master CTRL and the two slave groups RMT and
RMT2 was set to 1. Therefore, all devices with the
same weighting take part in the flash exposure.
In this example, the master CTRL does not take part
in the flash exposure.
The slave group RMT takes part in the flash exposu-
re with 2 of a total of 6 shares (2 + 4 = 6).
The slave group RMT2 takes part in the flash expo-
sure with 4 of a total of 6 shares.
In this example, the master CTRL takes part in the
flash exposure with 2 of a total of 26 shares (2 + 8 +
16 = 26).
The slave group RMT takes part in the flash exposu-
re with 8 of a total of 26 shares.
The slave group RMT2 takes part in the flash expo-
sure with 16 of a total of 26 shares.
P 1/1
CTRL 1
RMT 1
RMT2 1
CTRL+
M
P 1/1
CTRL -
RMT 2
RMT2 4
CTRL+
M
P 1/1
CTRL 2
RMT 8
RMT2 16
CTRL+
M
RATIO
OFF
CTRL
RMT
