Bedienungsanleitung Mia IKP2209 (Seite 19 von 21) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

714862

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Prodomus

flashing. To change the time just push the arrow buttons ( up, down).

When pushing the TIMER button a second time, the digits for minutes are active and flashing.

To change also push the arrow buttons. To save the adjusted time, just wait some seconds without

pushing any button.

TIMER function is active as long as the LED control lamp above the clock symbol is illuminated. To

deactivate/delete the timer function, push the TIMER button several times, till the control lamp

above switches off. Now timer is off. The display will now indicate the last value of power or

temperature level which has been adjusted before (e. g. 10 or 180). When the adjusted time has

elapsed, an acoustic signal will sound and the appliance will change into standby mode.

1 = LCD display shows the mode of adjustment

2= Selection button for for changing into higher level of power, time, temperature ()

3 = Selection button for for changing into lower level of power, time, temperature ()

4 = Switch for adjustment of the power function, levels 1-10 (STUFE)

5 = Switch for adjustment of the temperature function in °C (TEMP)

6 = Adjustment of the time function (TIMER)

7 = ON/OFF switch

8 = LED indicators (STUFE = Power, TEMP, TIMER, ON/OFF)

After finishing the cooking or keeping warm process always switch off the device and unplug. All

functions can be adjusted manually by pressing the corresponding buttons. We recommend to follow the

instructions in chapter “Operating of the device”. Do not use the appliance if it shows any sign of damage

or malfunction. Please contact the customer service (see “Warranty claims”) in such case. Do not put

empty cook ware on the appliance and do not leave cookware too long on the appliance to avoid comp-

letely boiling away of the liquid. Overheating of cookware will activate the boil dry protection of the device.

Note: If the unit displays the error code E2, it has been overheated by too hot cookware.

In this case turn off and unplug the appliance and let it cool down completely.

Safety functions

All error codes you will find in the table below. Please see "safety functions" on page 15 and 16 also.

In errors cases E-1-5 for safety reason unplug the appliance and let it cool down.

Attention: After use and when the cooking or warming process is finished always switch OFF

and unplug the appliance.

Symptom

Possible cause and corrective action

Display shows E-0

No pot on heating plateԁ

No pot that suits, pot bottom surface less than 10 cm

Put the pot correctly on the middle of the plate

Display shows E-1

High temperature protection; unplug an let the unit cool down

Open circuit protection or fail function of temperature sensor,

short circuit protection; unplug and apply to a qualified electrician

Display shows E-2

Pot bottom temperature too high; unplug an let the unit cool down

Stove temperature sensor open, fail function or short circuit; unplug

and apply to a qualified electrician

Display shows E-3

Voltage exceeded 270 V, use it after voltage returned to normal

Display shows E-4

Voltage lower than 140 V, use it after voltage returned to normal

Display shows E-5

Current is over or under, use it after voltage returned to normal

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mia IKP2209 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info