Bedienungsanleitung Microlife bp a 100 plus (Seite 7 von 105) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

403134

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

5BP A100 Plus

6. Data Memory

At the end of a measurement, this instrument automatically stores

each result, including date and time.

Viewing the stored values

Press the M-button AT briefly, when the instrument is switched

off. The display first shows «M» AP and then a value, e.g. «M 17».

This means that there are 17 values in the memory. The instrument

then switches to the last stored result.

Pressing the M-button again displays the previous value. Pressing

the M-button repeatedly enables you to move from one stored

value to another.

Memory full

Clearing all values

If you are sure that you want to permanently remove all stored

values, hold down the M-button (the instrument must have been

switched off beforehand) until «CL» appears and then release the

button. To permanently clear the memory, press the M-button

while «CL» is flashing. Individual values cannot be cleared.

How not to store a reading

Press the ON/OFF button 1 while the reading is being displayed.

Keep the button pressed until «M» AP is flashing and then release

it. Confirm by pressing the M-button.

7. Replacing the Slot-in Card

You can replace the slot-in card 3 by pulling it out to the side, as

shown in Fig. IV and replacing the paper insert.

It may be helpful to have your doctor note down the medication

dosage or an emergency telephone number on the card. Extra

cards are supplied with the instrument for this purpose.

8. Setting the Alarm Function

This instrument allows you to set 2 alarm times at which an alarm

signal will then be triggered. This can be a useful aid, for instance

as a reminder to take medication.

9. Battery Indicator and Battery change

Low battery

When the batteries are approximately ¾ empty the battery symbol

AO will flash as soon as the instrument is switched on (partly filled

battery displayed). Although the instrument will continue to

measure reliably, you should obtain replacement batteries.



Pay attention that the maximum memory capacity of 200 is

not exceeded. When the memory is full, the old values

are automatically overwritten with new ones. Values

should be evaluated by a doctor before the memory capacity

is reached – otherwise data will be lost.

1. To set an alarm time, press the time button AL (the instrument

must have been switched off beforehand) and immediately

afterwards the M-button AT and hold both down until the bell

symbol BN appears in the bottom left of the display. Then

release both buttons. The flashing «1» in the display indicates

that the first alarm time can now be set.

2. Press the time button to set the hours – the hour display flashes

and pressing the M-button allows you to set the alarm hour. To

confirm, press the time button.

3. The minute display will now flash. The minutes can be set using

the M-button. To confirm, press the time button again.

4. The bell symbol will now flash. Use the M-button to select

whether the alarm time is to be active (bell) or inactive (crossed-

out bell). To confirm, press the time button.

To set a second alarm time, proceed as above but if the «

» flashes,

press the M-button to select «

» and confirm with the time button.

An active alarm time is indicated by the bell symbol in the display.

The alarm will sound at the set time every day.

To switch-off the alarm when it is sounding, press the ON/OFF

button 1.

To permanently switch off the alarm, proceed as above and

select the crossed-out bell symbol. This will then disappear

from the display.

The alarm times must be re-entered each time the batteries are

replaced.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife bp a 100 plus Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Microlife bp a 100 plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info