Bedienungsanleitung Microlife BP B6 Connect (Seite 5 von 109) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

704040

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

3BP B6 Connect



Keep the arm still during measuring to avoid false readings.



This device may not or wrongly detect atrial fibrillation in

people with pacemakers or defibrillators.



In the presence of atrial fibrillation the diastolic blood pressure

value may not be accurate.



In the presence of atrial fibrillation using MAM-mode is recom-

mended for more reliable blood pressure measurement.

What is Atrial Fibrillation (AF)?

Normally, your heart contracts and relaxes to a regular beat. Certain

cells in your heart produce electrical signals that cause the heart to

contract and pump blood. Atrial fibrillation occurs when rapid, disorga-

nized electrical signals are present in the heart’s two upper chambers,

called the atria; causing them to contract irregularly (this is called fibril-

lation). Atrial fibrillation is the most common form of heart arrhythmia.

It often causes no symptoms, yet it significantly increases your risk of

stroke. You’ll need a doctor to help you control the problem.

Who should be screened for Atrial Fibrillation?

AF screening is recommended for people over 65 years of age, since

the chance of having a stroke increases with age. AF screening is

also recommended for people from the age of 50 years who have

high blood pressure (e.g. SYS higher than 159 or DIA higher than 99)

as well as those with diabetes, coronary heart failure or for those who

have previously had a stroke.

In young people or in pregnancy AF screening is not recommended

as it could generate false results and unnecessary anxiety. In addi-

tion, young individuals with AF have a low risk of getting stroke as

compared to elder people.

Risk factors you can control

Early diagnosis of AF followed by adequate treatment can signifi-

cantly reduce the risk of getting stroke. Knowing your blood pressure

and knowing whether you have AF is the first step in proactive stroke

prevention.

For more information visit our website: www.microlife.com/afib.

2. Using the Device for the First Time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment

is on the bottom of the device. Insert the

batteries (4 x 1.5 V, size AA), thereby observing the indicated polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button 3. To

confirm and then set the month, press the time button 4.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button down for approx. 3 seconds until the year number starts

to flash. Now you can enter the new values as described above.

Selecting the correct cuff

Microlife offers different cuff sizes. Select the cuff size to match the

circumference of your upper arms (measured by close fitting in the

centre of the upper arm).



Only use Microlife cuffs.



Contact your local Microlife Service if the enclosed cuff AL does

not fit.



Connect the cuff to the device by inserting the cuff connector AN

into the cuff socket 6 as far as it will go.



If you buy a spare Microlife cuff, please remove the cuff

connector AN from the cuff tube AM from the cuff supplied

with the original device and insert this cuff connector into

the tube of the spare cuff (valid for all cuff sizes).

Selecting the user

This device allows to store the results for 2 individual users.



Select the intended user (user 1 or user 2 BN) by pressing the

user button 5.



Before each measurement, ensure that the correct user is

selected.

Selecting standard or MAM mode

Before each measurement, select standard (single measurement)

or MAM mode (automatic triple measurement). In MAM mode,

3 measurements are automatically taken in succession and the

Cuff size for circumference of upper arm

S 17 - 22 cm

M 22 - 32 cm

M - L 22 - 42 cm

L 32 - 42 cm

L - XL 32 - 52 cm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife BP B6 Connect Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info