Bedienungsanleitung Microlife IR 210 (Seite 6 von 81) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

773464

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

In the following situations it is recommended that three temper-

atures in the same ear be taken and the highest one taken as

the reading:

1. New born infants in the first 100 days.

2. Children under three years of age with a compromised

immune system and for whom the presence or absence of

fever is critical.

3. When the user is learning how to use the thermometer for

the first time until he/she has familiarized himself/herself with

the device and obtains consistent readings.

4. If the measurement is surprisingly low.

Don't take a measurement while or immediately after nursing a

baby.

Don't use the thermometer in high humidity environments.

Patients should not drink, eat or exercise before/while taking

the measurement.

Doctors recommend rectal measurement for newborn infants

within the first 6 months, as all other measuring methods might

lead to ambiguous results.

Readings from different measuring sites should not be

compared as the normal body temperature varies by

measuring site and time of day, being highest in the evening

and lowest about one hour before waking up.

Normal body temperature ranges:

- Axillar: 34.7 - 37.3 °C / 94.5 - 99.1 °F

- Oral: 35.5 - 37.5 °C / 95.9 - 99.5 °F

- Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 °F

- Microlife IR 210: 35.4 - 37.4 °C / 95.7 - 99.3 °F

8. Changing between Celsius and Fahrenheit

This thermometer can display temperature readings in either Fahr-

enheit or Celsius. To switch the display between °C and °F, press

and hold the MODE button 4 for 3 seconds; the beeper icon is

shown on the display. Press the MODE button again; the current

measurement scale («°C» or «°F» icon) will be shown on the

display AQ. Change the measurement scale between °C and °F by

pressing the M-button 3. When the measurement scale has been

chosen, press the START/IO button 6 to enter the «ready for

measuring» mode; otherwise the device automatically switches to

ready for measuring after 10 seconds 9.

9. How to recall 30 readings in Memory Mode

This thermometer can recall the last 30 readings with a record of

both time and date.

Recall mode AR: Press the M-button 3 to enter recall mode

when the power is off. The memory icon «M» will flash.

Reading 1 - the last reading AS: Press and release the M-

button 3 to recall the last reading. Number «1» and a flashing

«M» are displayed.

Pressing and releasing the M-button

after the last 30 readings

have been recalled will resume the above sequence from reading 1.

10.Error Messages

Measured temperature too high BT:Displays «H» when

measured temperature is higher than 43 °C / 109.4 °F in body

mode or 99.9 °C / 211.8 °F in object mode.

Measured temperature too low BK:Displays «L» when

measured temperature is lower than 32 °C / 89.6 °F in body

mode or 0,1 °C / 32,2 °F in object mode.

Ambient temperature too high BL: Displays «AH» when

ambient temperature is higher than 40.0 °C / 104.0 °F.

Ambient temperature too low BM: Display «AL» when

ambient temperature is lower than 10.0 °C / 50.0 °F.

Incorrect location indication AN: The probe is not correctly

inserted in the ear canal. Please insert the probe as described

in this manual.

Error function display AO: The system has a malfunction.

Blank display BO: Check if the battery has been loaded

correctly. Also check polarity (<+> and <->) of the battery.

Flat battery indication BP: If only the «battery» icon is shown

on the display, the battery should be replaced immediately.

11.Cleaning and Disinfecting

Use an alcohol swab or cotton tissue moistened with alcohol (70%

Isopropyl) to clean the thermometer casing and the measuring

sensor. Ensure that no liquid enters the interior of the device. Never

use abrasive cleaning agents, thinners or benzene for cleaning and

never immerse the device in water or other cleaning liquids. Take

care not to scratch the surface of the sensor lens and the display.

12.Battery Replacement

This device is supplied with one lithium battery, type CR2032. The

battery needs replacing when only the «battery» icon BP is shown

on the display.

Remove the battery cover BS by sliding it in the direction shown.

Insert the new battery with the + at the top.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife IR 210 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info