Bedienungsanleitung Microlife NC 150 (Seite 6 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

536862

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

 Always take the temperature in the same location, since

temperature readings may vary according to locations.

 Doctors recommend rectal measurement for newborn infants

within the first 6 months, as all other measuring methods might

lead to ambiguous results. If using a non contact thermometer

on those infants, we always recommend verifying the readings

with a rectal measurement.

 In the following situations it is recommended that three temper-

atures are taken with the highest one taken as the reading:

1. Children under three years of age with a compromised

immune system and for whom the presence or absence of

fever is critical.

2. When the user is learning how to use the thermometer for

the first time until he/she has familiarized himself/herself with

the device and obtains consistent readings.

3. If the measurement is surprisingly low.

 Readings from different measuring sites should not be

compared as the normal body temperature varies by

measuring site and time of day, being highest in the evening

and lowest about one hour before waking up.

Normal body temperature ranges:

- Axillar: 34.7 - 37.3 °C / 94.5 - 99.1 °F

- Oral: 35.5 - 37.5 °C / 95.9 - 99.5 °F

- Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 °F

- Microlife NC 150: 35.4 - 37.4 °C / 95.7 - 99.3 °F

8. Changing between Celsius and Fahrenheit

This thermometer can display temperature readings in either Fahr-

enheit or Celsius. To switch the display between °C and °F, simply

turn OFF the unit, press and hold the START button 4 for 5

seconds; after 5 seconds, the current measurement scale («°C» or

«°F» icon) will flash on the display AP. Change the measurement

scale between °C and °F by pressing the START button 4. When

the measurement scale has been chosen, wait for 5 seconds and

the unit will automatically enter the «ready for measuring» mode.

9. How to recall 30 readings in Memory Mode

This thermometer can recall the last 30 readings with a record of

both time and date.

 Recall mode AQ: Press the M-button 8 to enter recall mode

when the power is off. The memory icon «M» will flash.

 Reading 1 - the last reading AR: Press and release the M-

button 8 to recall the last reading. Number «1» and a flashing

«M» are displayed.

 Reading 30 - readings in succession: Press and release the

M-button 8 consecutively to recall the last 30 readings in

succession.

Pressing and releasing the M-button

after the last

readings

have been recalled will resume the above sequence from reading 1.

10.Error Messages

 Measured temperature too high AS: Displays «H» when

measured temperature is higher than 42.2 °C / 108.0 °F in

body mode or 100 °C / 212 °F in object mode.

 Measured temperature too low BT: Displays «L» when

measured temperature is lower than 34.0 °C / 93.2 °F in body

mode or 0 °C / 32 °F in object mode.

 Ambient temperature too high BK: Displays «H» and

when ambient temperature is higher than 40.0 °C / 104.0 °F.

 Ambient temperature too low BL: Displays «L» and when

ambient temperature is lower than 16.0 °C / 60.8 °F in body

mode or lower than 5.0 °C / 41.0 °F in object mode.

 Error function display BM: The system has a malfunction.

 Blank display BN: Check if the batteries have been inserted

correctly. Also check polarity (<+> and <->) of the batteries.

 Flat battery indicator BO: If only «» icon is shown on the

display, the batteries should be replaced immediately.

11.Cleaning and Disinfecting

Use an alcohol swab or cotton tissue moistened with alcohol (70%

Isopropyl) to clean the thermometer casing and the measuring

sensor. Ensure that no liquid enters the interior of the device. Never

use abrasive cleaning agents, thinners or benzene for cleaning and

never immerse the device in water or other cleaning liquids. Take

care not to scratch the surface of the sensor lens and the display.

12.Battery Replacement

This device is supplied with 2 new, long-life 1.5V, size AAA

batteries. Batteries need replacing when this icon «» BO is the

only symbol shown on the display.

Remove the battery cover BR by sliding it in the direction shown.

Replace the batteries – ensure correct polarity as shown by the

symbols in the compartment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife NC 150 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info