747631
73
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
74 of 80
9.2. Cleaning the suction openings
After a while, dirt and dust can collect around the suction openings and can reduce
the suction power. To avoid this, the suction openings should be cleaned regularly.
Switch off the appliance.
Remove dirt and dust from in and around the suction opening on the handheld
appliance and around the brush, as well as from the suction tube in the vacuum
cleaner foot.
You can remove the brush on the vacuum cleaner foot for cleaning purposes:
Use a suitably sized coin to turn the brush locking mechanism in an anticlock-
wise direction and then remove the cover. Remove the brush and clean it.
Insert the brush again so that the triangular recess on the brush fits the triangu-
lar lug on the foot housing and the other end with the flat side is pointing up-
wards. Then replace the cover and lock it again with the brush locking mecha-
nism by turning it in a clockwise direction.
In the event of a clogged vacuum cleaner foot, remove it from the upright vacu-
um cleaner housing by pressing the release button on the bottom of the upright
vacuum cleaner housing backwards and pulling off the foot at the same time.
Remove the foreign body from the vacuum cleaner foot and the suction tube on
the upright vacuum cleaner housing.
Then assemble the upright vacuum cleaner as described above.
10. Problem solving
If the appliance malfunctions, please check first if you can eliminate the error your-
self with the help of the following overview.
Never try to repair the appliance yourself. Contact our Service Centre or other quali-
fied personnel if a repair is necessary.
Problem Remedy
The vacuum cleaner
is not working
The rechargeable battery is not sufficiently charged
The suction capacity
is reduced
The suction nozzles are blocked. Switch off the appli-
ance. Remove the blockage.
Dust filter/cyclone insert is dirty. Clean the dust filter/
cyclone insert.
The vacuum cleaner
makes unusual nois-
es during operation
Switch off the vacuum cleaner immediately. The suction
nozzle is blocked. Remove the blockage.
16431 MULI eCommerce Content Final REV2.indb 7416431 MULI eCommerce Content Final REV2.indb 74 08.07.2015 10:19:5908.07.2015 10:19:59
73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Micromaxx MD 16431 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info