Bedienungsanleitung Midas M32 (Seite 12 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

12 M32 DIGITAL CONSOLE User Manual

1.10 Main Display (Summary)

(1) DISPLAY SCREEN

The controls in this section are used in conjunction with the colour screen in

order to navigate and control the graphical elements it contains.

By including dedicated push encoders that correspond to the adjacent

controls on the screen, as well as including cursor buttons, the user can

quickly navigate and control all of the colour screen’s elements.

The colour screen contains various displays that give visual feedback for

the operation of the console, and also allow the user to make various

adjustments not provided for by the dedicated hardware controls.

(2) MAIN/SOLO METERS

This triple 24-segment meter displays the audio signal level output from the

main bus, as well as the main centre or solo bus of the console.

(3) SCREEN SELECTION BUTTONS

These eight illuminated buttons allow the user to immediately navigate

to any of the eight master screens that address dierent sections of the

console. The sections that can be navigated are:

HOME

The HOME screen contains an overview of the selected input or output

channel, and oers various adjustments not available through the dedicated

top-panel controls.

The HOME screen contains the following separate tabs:

home: General signal path for the selected input or output channel.

cong: Allows selection of the signal source/destination for the

channel, conguration of insert point, and other settings.

gate: Controls and displays the channel gate eect beyond those

oered by the dedicated top-panel controls.

dyn: Dynamics - controls and displays the channel dynamics eect

(compressor) beyond those oered by the dedicated top-panel controls.

eq: Controls and displays the channel EQ eect beyond those oered by

the dedicated top-panel controls.

sends: Controls and displays for channel sends, such as sends metering

and send muting.

main: Controls and displays for the selected channel’s output.

METERS

The METERS screen displays dierent groups of level meters for various

signal paths, and is useful for quickly ascertaining if any channels need

level adjustment. Since there are no parameters to adjust for the metering

displays, none of the metering screens contain any ‘bottom of the screen’

controls that would normally be adjusted by the six push encoders.

The METERS screen contains the following separate screen tabs, each

containing level meters for the relevant signal paths: channel, mix bus,

aux/fx, in/out and rta.

ROUTING

The ROUTING screen is where all signal patching is done, allowing the

user to route internal signal paths to and from the physical input/output

connectors located on the console’s rear panel.

The ROUTING screen contains the following separate tabs:

home: Allows patching of physical inputs to the 32 input channels and

aux inputs of the console.

out 1-16: Allows patching of internal signal paths to the console’s 16

rear panel XLR outputs.

aux out: Allows patching of internal signal paths to the console’s six

rear panel ¼” / RCA auxiliary outputs.

p16 out: Allows patching of internal signal paths to the 16 outputs of

the console’s 16-channel P16 Ultranet output.

card out: Allows patching of internal signal paths to the 32 outputs of

the expansion card.

aes50-a: Allows patching of internal signal paths to the 48 outputs of

the rear panel AES50-A output.

aes50-b: Allows patching of internal signal paths to the 48 outputs of

the rear panel AES50-B output.

xlr out: Allows the user to congure the XLR outs on the rear of the

console in blocks of four, from either local inputs, the AES streams, or

expansion card.

SETUP

The SETUP screen oers controls for global, high-level functions of the

console, such as display adjustments, sample rates & synchronisation,

usersettings, and network conguration.

The SETUP screen contains the following separate tabs:

global: This screen oers adjustments for various global preferences of

how the console operates.

cong: This screen oers adjustments for sample rates and

synchronisation, as well as conguring high-level settings for signal

path buses.

remote: This screen oers dierent controls for setting up the console

as a control surface for various DAW recording software on a connected

computer. It also congures the MIDI Rx/Tx preferences.

network: This screen oers dierent controls for attaching the console

to a standard Ethernet network. (IP address, Subnet Mask, Gateway.)

scribble strip: This screen oers controls for various customisation of

the console’s LCD scribble strips.

preamps: Shows the analogue gain for local mic inputs (XLR at the

rear) and phantom power, including setup from remote stage boxes

(e.g.DL16) connected via AES50.

card: This screen selects the input/output conguration of the installed

interface card.

(3)

(4)

(1)

(2)

(5)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info