Bedienungsanleitung Midas M32 (Seite 34 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

34 M32 DIGITAL CONSOLE User Manual

MONITOR Screen

There are no Utility functions on any of the MONITOR screen’s tabs.

TALKBACK Screen

There are no Utility functions on any of the TALKBACK screen’s tabs.

SHOW CONTROL Screen

Pressing the UTILITY button while on any of the SCENES screen’s tabs provides

an interface for copying, pasting, loading and saving dierent scenes in the

scene list. Adjust and tap the six push encoders to perform these functions. More

information can be found in the SHOW CONTROL section.

ASSIGN Screen

There are no Utility functions on any of the ASSIGN screen’s tabs.

2.9 Internal Eects

The M32 contains over 60 internal eects that can be applied to each of the input

channels, either as inserts or as sends and returns. Access the internal eects by

pressing the EFFECTS button next to the Main Display. The functionality for each

of the eects is detailed below.

Hall Reverb

Classic Hall Reverb simulates the reverberation that occurs when sound is

recorded in medium- to large-sized convert halls. Use the Hall Reverb to give your

mix a lush , three-dimensional quality that will make your performance sound

larger than life. Inspired by the Lexicon Hall.

The PRE DELAY slider controls the amount of time before the reverberation

is heard following the source signal. DECAY controls the amount of time it

takes for the reverb to dissipate. SIZE controls the perceived size of the space

being created by the reverb eect. The DAMP slider adjust the decay of high

frequencies within the reverb tail. DIFF(usion) controls the initial reection

density. SHAPE adjust the contour of the reverberation envelope.

LO CUT and HI CUT function as Low- and High-Cut lters. BASSMULT multiplies

the bass frequencies and MOD SPEED adjusts the speed of the eect’s

modulation. SHAPE adjust the contour of the reverberation envelope.

Ambience

Ambience creates a customisable virtual acoustic space in which to place the

elements of a mix. Use Ambience to add warmth and depth without colouring

the direct sound. Inspired by the Lexicon Ambience Algorithm.

PRE DELAY sets the time before the reverb follows the source signal. DECAY

adjusts the time it takes for the reverb to completely dissipate. SIZE controls the

room size emulation. DAMPING controls the high-frequency decay within the

reverb tail. DIFFUSE controls the initial echo density. The level sets the volume

output of the aected signal. LO CUT aects the low frequency cut, allowing

lower frequencies to remain unaected by the reverb. HI CUT aects the high

frequency cut, allowing higher frequencies to remain unaected by the reverb.

MOD adjusts the level of reverb decay modulation. TAIL GAIN adjusts the volume

of the reverb tail.

Rich Plate Reverb

Rich Plate Reverb was originally created by sending a signal through a transducer

to create vibrations on a plate of sheet metal which were then picked up as an

audio signal. Our algorithm simulates that sound with high initial diusion and a

bright-coloured sound. Inspired by the Lexicon Plate Reverb.

The PRE DELAY slider controls the amount of time before the reverberation is

heard following the source signal. DECAY controls the amount of time it takes for

the reverb to dissipate. SIZE controls the perceived size of the space being created

by the reverb eect. The DAMP slider adjust the decay of high frequencies within

the reverb tail. DIFF(usion) controls the initial reectiondensity.

LO CUT and HI CUT function as Low- and High-Cut lters. BASSMULT multiplies

the bass frequencies and MOD SPEED adjusts the speed of the eect’s

modulation. SHAPE adjust the contour of the reverberation envelope.

The SPIN parameter sets the amount of random modulation for the reverb tail.

The parameters Echo / EchoFeed set the parameters of a feedback delay at

the input of the reverb (independant for both input channels). Echo sets the

delaytime and EchoFeed the amount of feedback (positive or negative). This

allows to further increase the reection density of the reverb.

Room Reverb

Room Reverb simulates the reverberation that occurs when sound is recorded in

a small room. When you want to add a bit of warmth and just a touch of reverb,

the M32’s Vintage Room breathes life into close-miked guitar and drum tracks.

Inspired by the Lexicon Room Reverb.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info