Bedienungsanleitung Midas M32 (Seite 35 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

35 M32 DIGITAL CONSOLE User Manual

The PRE DELAY slider controls the amount of time before the reverberation

is heard following the source signal. DECAY controls the amount of time it

takes for the reverb to dissipate. SIZE controls the perceived size of the space

being created by the reverb eect. The DAMP slider adjust the decay of high

frequencies within the reverb tail. DIFF(usion) controls the initial reection

density. SHAPE adjust the contour of the reverberation envelope.

Chamber Reverb

Chamber Reverb simulates the reverberation found in medium sized spaces,

somewhere between the intimacy of a small room, and the grandeur of a large

hall. Inspired by the Lexicon Chamber Reverb.

The PRE DELAY slider controls the amount of time before the reverberation

is heard following the source signal. DECAY controls the amount of time it

takes for the reverb to dissipate. SIZE controls the perceived size of the space

being created by the reverb eect. The DAMP slider adjust the decay of high

frequencies within the reverb tail. DIFF(usion) controls the initial reection

density. SHAPE adjust the contour of the reverberation envelope.

Plate Reverb

A plate reverb was originally created by sending a signal through a transducer

to create vibrations on a plate of sheet metal which were then picked up as an

audio signal. Our algorithm simulates that sound with high initial diusion and

a bright-coloured sound. The M32’s Plate Reverb will give your tracks the sound

heard on countless hit records since the late 1950s. Inspired by the Lexicon PCM-70.

PRE DELAY controls the amount of time before the reverberation is heard

following the source signal. DECAY controls the amount of time it takes for the

reverb to dissipate. SIZE adjusts the size of the virtual room created by the reverb

eect. The DAMP push encoder adjusts the decay of high frequencies within the

reverb tail. DIFF(usion) controls the initial reection density. LEVEL controls the

volume of the reverb.

The LO CUT push encoder sets the frequency beneath which the source signal will

not pass through the reverb. The HI CUT push encoder sets the frequency above

which the source signal will not pass through the reverb. BASS MULT(iplier)

push encoder adjusts the decay time of the bass frequencies. XOVER controls

the crossover point for bass. MOD DEPTH controls the intensity of the reverb tail

modulation. MOD SPEED controls the speed of the reverb tail modulation.

Vintage Reverb

Based on the legendary EMT250, the M32’s Vintage Reverb delivers shimmering,

bright reverb that won’t drown out or overpower your live or recorded tracks. Use

Vintage Reverb to sweeten vocals and snare drums without sacricing clarity.

When Layer 1 is selected, the rst slider on the left sets the reverb time from 4

milliseconds to 4.5 seconds. Slider 2 controls the low-frequency multiplier decay

time. Slider 3 controls the high-frequency multiplier decay time. Slider 4 controls

the amount of modulation in the reverb tail. When Layer 2 is selected, slider 1

adjusts the pre-delay. Slider 2 selects the low-cut frequency. Slider 3 selects the

hi-cut frequency. Slider 4 selects adjusts the output level of the reverb.

Pressing the rst push encoder on Layer 1 will switch the reverb algorithm to

emulate the perceived position of the reverb in the virtual space. The same

control on Layer 2 will change the reverb algorithm to give a warmer, more

‘vintage’ sound.

Vintage Room

Vintage Room simulates the reverberation that occurs when sound is recorded in

a small room. When you want to add a bit of warmth and just a touch of reverb,

the M32’s Vintage Room breathes life into close-miked guitar and drum tracks.

Inspired by the Quantec QRS.

The VU meter displays the input and output levels. Set the early reection times

for the left and right channel with ER DELAY L and ER DELAY R. ER LEVEL sets

the loudness of the early reection level. REV DELAY controls the amount of time

before the reverberation is heard following the source signal. LEVEL controls the

volume of the reverb. Pressing the second push encoder will engage the FREEZE

function which takes the incoming audio and loops it indenitely.

HI/LO MULTIPLY adjusts the decay time of the high and bass frequencies.

DECAY shows the duration of the reverb eect. ROOM SIZE adjusts the size of

the room eect being created incrementally from small to large. HIGH CUT sets

the frequency above which the source signal does not pass through the reverb.

DENSITY manipulates the reection density in the simulated room. (This slightly

changes the reverb decay time.) LOW CUT sets the frequency below which the

source signal does not pass through the reverb.

Gated Reverb

This eect was originally achieved by combining a reverb with a noise gate.

Ourgated reverb creates the same impression by a special shaping of the reverb

tail. Gated Reverb is especially eective for creating a 1980’s-style snare sound,

or to enlarge the presence of a kick drum. Inspired by the Lexicon 300/480L.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info