54 DIGITAL RACK MIXER M32R User Manual 55 DIGITAL RACK MIXER M32R User Manual
Permanent MIDI Assignments Overview (Remote O )
MIDI TX MIDI Ch Controller Value Comment
Mute Groups 2 CC80-85 on (127) / o (0), toggle latching
Faders 1 CC80-79 0-127 Value 95 = 0dB
Mute 2 CC80-79 on (127) / o (0), toggle latching
Pan 3 CC80-79 0-127 Value 64 = Pan Mid
MIDI RX MIDI Ch Controller Value Comment
Scenes 1 Program Change 1-100
Snippet 2 Program Change 1-100
Cue 3-6 Program Change 0-127 Ch3 -> Cue 1-127, Ch4 -> Cue 128-255, etc.
Mute Groups 2 CC80-85 on (127) / o (0), toggle latching
Faders 1 CC0-79 0-127 Value 95 = 0dB
Mute 2 CC0-79 on (127) / o (0), toggle latching
Pan 2 CC0-79 0-127 Value 64 = Pan Mid
MIDI RX > Assign
Whenever assignable controls are set up for transmitting MIDI commands,
reception of that same command (status or continuous) will be re ected on the
respective assignable control element (buttonlight, encoder LED collar).
MIDITX > Assign
The assignable MIDI commands have been restricted to some generic elements:
Encoders 1-4 > can be assigned to sending control changes, program changes
or notes.
• • Parameters are currently ‘Channel’ and ‘Value’
• • For CC and Note commands ‘Value’ = controller number/note
number, and the encoder rotation determines the controller value/
note-on velocity
• • For Program Changes only the channel is speci ed, and the encoder
rotation determines the programnumber
Buttons 5-12 > can be operated in two modes, ‘MIDI Push’ (non-latching) for
momentary commands, or ‘MIDI Toggle’ (latching) for static commands.
MIDI Push
Can be assigned to sending control changes, program changes or notes
Parameters are currently ‘Channel’ and ‘Value’
For CC and Note commands ‘Value’ 0…127 = controller number/note number,
and the button momentarily toggles the controller value/note-on velocity
To 127 (depressed/released]
For Program Changes ‘Value’ 0…127 = program/preset number, that will be sent
upon pressingthe button.
MIDI Toggle
Can be assigned to sending control changes or notes
Parameters are currently ‘Channel’ and ‘Value’
For CC and Note commands ‘Value’ 0…127 = controller number/note number,
and the button toggles the controller value/note-on velocity
Between value/velocity 127 and 0 with every operation.
PLEASE NOTE:
The ASSIGN section also re ects/displays reception of the same MIDI commands
that are selected for transmission
The MIDI commands assigned to the ASSIGN controls can be transferred to and
from stage via AES50 using the S16 stage box MIDI I/O.
MIDIRX/TX > Remote
Enables a speci c form of bi-directional MIDI communication for remote
controlling a computer DAW application using control elements of the
M32 console.REMOTEcan be used in threemodes,MackieControl,HUIand
rawMIDI CC (raw)controllers (see SETUP / remote)
MIDI CC (raw) selected and Remote is enabled+active, thegroup section controls
will transmit/receive the following messages:
MIDI RX MIDI Ch Controller Comment
Group 1-8 SELECT 1 Note 64-71 on (127) / o (0), push non-latching
Group 1-8 SOLO 1 CC 32-39 on (127) / o (0), toggle latching
Group 1-8 MUTE 1 CC 40-47 on (127) / o (0), toggle latching
Sends On Fader 1 CC 48 on (127) / o (0), toggle latching
Group DCA 1-8 1 Note 72 on (127) / o (0), push non-latching
BUS 1-8 1 Note 73 on (127) / o (0), push non-latching
BUS 9-16 1 Note 74 on (127) / o (0), push non-latching
MTX 1-6 1 Note 75 on (127) / o (0), push non-latching
GROUP Faders 1 CC0-7 0-127
HUI selected and Remote is enabled+active, then the group fader section and
buttons will emulate the HUI control surface protocol, i.e. for ProTools.
SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW,
in banks of eighttracks
Sends On Fader = enables touch-writing a fader automation on selected track,
trackautomation mode in DAW must be ‘touch’, (latching)
Use the layer buttons to determine the function assigned to
the MUTE 1-8 buttons, the LED displays indicate that function.
• • Group DCA 1-8 = allows movement of the bank selection of tracks
in a DAW, (push non-latching)
• • BUS 1-8 = allows the setting of DAW tracks to ‘Record Ready’,
(push non-latching)
• • BUS 9-16 = enables use of MUTE buttons for track mute in
the DAW, (latching)
• • MTX 1-6 = enables use of MUTE buttons for transport controls in
the DAW, (latching).
MACKIE CTRL selected and Remote is enabled+active, then the group fader
section and buttons will emulate the Mackie Control Universal protocol
SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW,
in banks of eighttracks
Sends On Fader = enables touch-writing a fader automation on selected track,
track automation mode in DAW must be ‘touch’ or ‘latch’, (latching)
Use the layer buttons to determine the function assigned to the
MUTE 1-8 buttons, the LED displays indicate that function.
• • Group DCA 1-8 = allows movement of the bank selection of tracks in a
DAW, (push non-latching)
• • BUS 1-8 = allows the setting of DAW tracks to ‘Record Ready’,
(push non-latching)
• • BUS 9-16 = enables use of the MUTE buttons for track mute in
the DAW, (latching)
• • MTX 1-6 = enables use of the MUTE buttons for transport controls in
the DAW, (latching).