Bedienungsanleitung Midas MR18 (Seite 10 von 15) (Deutsch, Englisch, Französisch, Portugiesisch, Spanisch)

658494

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

18 19Quick Start GuideMR18

(EN) Step 3: Network

Connection

DIGITAL iPAD/TABLET MIXER MR18 Network Connection

Network Connection

The MR18 eliminates all hassles by

incorporating a wireless network router

that gives access to the mixer in three

di erent ways–via Ethernet LAN, or

wirelessly as a Wi Client or as an Access

Point. Selection is made with the REMOTE

switch [9]. Youmay view or change the

network preferences for these on any of

the MR18 remote control applications on

the “Setup/Network” page.

IP Address and DHCP

Depending on the connection scenario, the

MR18 o ers up to 3 options for connecting

a tablet or PC for software control – DHCP

Client, DHCP Server, and xed IP operation.

Connection is achieved di erently

depending on which option you choose:

DHCP Client mode is available in Ethernet

LAN or Wi Client operation. The mixer will

automatically request an IP lease from the

DHCP server that owns the IP addresses

in the network to which you are trying

toconnect.

DHCP Server (DHCPS) is optionally

available for Ethernet LAN connections

and is standard in Access Point operation.

Themixer will own the IP addresses and

provide IP leases to devices requesting

access to that network. The mixer will

always use IPaddress 192.168.1.1 and

assign IP addresses 192.168.1.101 –

192.168.1.132 to its clients.

Static IP is available for Ethernet LAN

and Wi Client operation. The mixer will

use the  xed (static) IP address, subnet

mask and gateway that you specify for

registering on the network. Make sure that

the addresses you specify manually are

not con icting with any other addresses

on the same network. Wegenerally

recommend using the DHCP mode, unless

you have a very speci c reason to set

itupmanually.

Note: Changing parameters of the

currently selected connection mode will

disconnect the software from the console.

If the console is erroneously con gured for

a  xed IP address that is incompatible with

the network it is connected to, the console

will be inaccessible. In this case, one of the

other two connection modes can be used

to regain access and amend the settings.

Ifthat does not work, holdthe Reset

button for 2 seconds to return to default

networksettings.

Mixer name and Ethernet setup screen

Ethernet/LAN

This mode supports DHCP Client (default),

DHCPServer, and  xed IP operation.

Note that if the MR18 is connected to

a network where no DHCP server is

present, themixer will generate an

automatic IP address (range169.254.1.0–

169.254.254.255). There are no security

options for LAN connections, so any

device in that network may take

control of connected MR18 consoles.

Whenconnecting via LAN/Ethernet to a

Wi router, makesure the security settings

of that router prevent unauthorized access.

Wi Client setup screen

Wi Client

This mode supports DHCP Client (default)

and  xed IP operation. The MR18 can

support WEP, WPA and WPA2 security

mechanisms in Wi Client mode and works

on Wi channels 1-11.

Correct SSID (network name) and

password need to be supplied to connect

to an existing network. WEPpasswords

have to be either 5 characters or

13characters long. If the supplied SSID and

password are incorrect, the mixer cannot

be accessed. Inthis case the networking

parameters have to be reset and another

connection mode has to be used to regain

access.

The Ethernet connection mode may

be used for con guration of the Wi

Client mode. While being connected

in Ethernet mode, the mixer can scan

the available wireless networks and

display their SSID network names,

 eld strength and security method. By

selecting the preferred wireless network,

this information can be copied to the

applications’ Wi Client setup page

automatically. You will then be prompted

to  ll in the security password of that

network. Afterswitching from Ethernet

to Wi Client mode, themixer should

connect to the selected wireless network

automatically, and will be displayed

by remote applications on any device

connected to the samenetwork.

Access Point setup screen

Access Point

This mode only supports DHCP Server

operation with a maximum of 4 clients,

working on Wi channels 1-11. Securityis

supported via WEP 40-bit (5 ASCII

characters) or WEP 104-bit (13 ASCII

characters). By default, the mixer will use

a network name consisting of the model

name plus the last bits of the mixer’s

unique MAC address (e.g. MR18-17-BE-C0).

The default IP address is 192.168.1.1 and no

security is engaged.

The control software is available

for Android and iPad tablets as

well as PC/Mac/Linux computers.

Visitmidasconsoles.com to download

the PC/Mac/Linux software. Thetablet

software can be downloaded from the app

store on your device.

To learn more about operating the

control software, visitthe product page

on midasconsoles.com to download the

fullmanual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas MR18 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info