658475
122
Zoom out
Zoom in
Vorherige Seite
1/130
Nächste Seite
110 Appendix E: Best Grounding Practice
VeniceF
Operator Manual
connecting balanced external processing equipment to the insert points, the connection
method described in this section should be adopted so as to benefit from the CMR of the
external unit.
For an example of how to wire a ground referenced insert, see Figure 2 on page 13.
Unbalanced connections
Ground loops with unbalanced signals are more difficult to deal with, but there are
several good techniques available. Firstly, many sources of unbalanced signals are
battery or class 2 powered devices without a safety earth connection, thus ground loops
are not being generated. These signals can be connected via single conductor cables
with an overall ground shield and should not present any problems.
Signal ground lift
Older processing equipment is often unbalanced, but even if it is a class 1 device, very
often the internal signal ground can be isolated from the safety ground. This is
normally achieved by setting an external "ground lift" switch or breaking an internal
link. Refer to the equipment’s manual and qualified technicians for advice on any such
internal links. If ground isolation is available it should be used so that the screen
ground connection from the insert points on the console provide a reference for all
signals within the inserted unit, eliminating the possibility for induced noise to corrupt
the signal path. Two core cables should be used with one core carrying the signal and
the other carrying the ground plus an overall screen (also grounded). The screen can
be connected at both ends or, as with balanced systems, it can be broken at one end if
that improves performance. Some experimentation may be needed.
Ground lift connection on destination
Ground lift connection on source
Chassis
Chassis
Earth lift
switch
Source
Destination
Screen
Chassis
Chassis
Earth lift
switch
Source
Destination
Screen
122

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Midas VeniceF F16 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info