Bedienungsanleitung Midea Vertu Design (Seite 11 von 15) (Englisch)

481347

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Under this condition, the air conditioner will stop heating operation and start defrosting

automatically.

The time to defrost may vary from 6 to 10 minutes according to the outdoor temperature

and the amount of frost buildup on the outdoor unit.

2. A white mist coming out from the indoor unit

A white mist may generate due to a large temperature difference between air inlet and

air outlet on COOL mode in an indoor environment that has a high relative humidity.

A white mist may generate due to moisture generated from defrosting process when the

air conditioner restarts in HEAT mode operation after defrosting.

3. Low noise of the air conditioner

You may hear a low hissing sound when the compressor is running or has just stopped

running. This sound is the sound of the refrigerant flowing or coming to a stop.

You can also hear a low "squeak" sound when the compressor is running or has just

stopped running. This is caused by heat expansion and cold contraction of the plastic

parts in the unit when the temperature is changing.

A noise may be heard due to louvre restoring to its original position when power is first

turned on.

4. Dust is blown out from the indoor unit.

This is a normal condition when the air conditioner has not been used for a long time or

during first use of the unit.

5. A peculiar smell comes out from the indoor unit.

This is caused by the indoor unit giving off smells permeated from building material, from

furniture, or smoke.

6. The air conditioner turns to FAN only mode from COOL or HEAT (reverse cycle models

only) mode.

When indoor temperature reaches the temperature setting on air conditioner, the compressor

will stop automatically, and the air conditioner turns to FAN only mode. The compressor will

start again when the indoor temperature rises on COOL mode or falls on HEAT mode

(reverse cycle models only) to the set point.

7. Dripping water may generate on the surface of the indoor unit when cooling in a high

relatively humidity (relative humidity higher than 80%). Adjust the horizontal louvre to the

maximum air outlet position and select HIGH fan speed.

8. Heating mode (Reverse cycle models only)

The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit

during heating operation. When the outdoor temperature falls, heat drawn in by the air

conditioner decreases accordingly. At the same time, heat loading of the air conditioner

increases due to larger difference between indoor and outdoor temperature. If a comfortable

temperature can't be achieved by the air conditioner, we suggest you use a supplementary

heating device.

9. Auto-restart function

After the power cut-off, the air conditioners can automatically restore the previous function setting.

10. Lightning or a car wireless telephone operating nearby may cause the unit to malfunction.

Disconnect the unit with power and then re-connect the unit with power again. Push the

ON/OFF button on the remote controller to restart operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midea Vertu Design Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midea Vertu Design

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info