5.Starting a washing programme5.Starting a washing programme
Wash Cycle TableWash Cycle Table
9
Means: need to fill rinse into the Rinse-Aid Dispenser.
( )
*AHAM DW-1-2005 : This program is the test cycle, the rinse-aid dispenser
setting is recommended to Position 3.
NOTE:NOTE:
NOTE:NOTE:
Turning On the ApplianceTurning On the Appliance
Starting a wash cycle...
1. Draw out the basket(see the section entitled Loading the Dishwasher );
2. Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid );
3. Insert the plug into the socket. The power supply is 120V/60 Hz;
4. Make sure that the water supply is turned on to full pressure;
5. Close the door and p
6.
ress the button
Press the program button to select wash program you need
Heavy->Normal->Speed
7.Then press the Start/Reset button, the dishwasher begins to start.
on/off To turn on the power supply;
.
When you press the Start/Reset button to pause during washing,
the program light will stop blinking and the dishwasher will mooing
every minute unless you press the Start/Reset button to start.
Detergent
pre/main
For normally soiled loads,
such as pots, plates,glasses
and lightly soiled pans.
standard daily cycle.
Cycle Selection
Information
For the heaviest soiled loads,
such as pots,pans,casserole
dishes and dishes that have
been sitting with dried food
on them for a while.
A shorter wash for lightly
soiled loads that do not
need drying.
Program
Running
time(min)
Energy
(Kwh)
Water
(l)
15 g.
85
100
45
0.361
0.424
0.233
12
14.5
12
Description
of Cycle
Rinse
Aid
Heavy
Speed
18g
18g
(*AHAM DW-1-2005 )
Normal
Pre-wash
Pre-wash(50 )
Wash (55 )
Wash (50 )
Rinse
Rinse (65 )
Drying
Pre-wash
Pre-wash
Wash (55 )
Rinse
Rinse (65 )
Drying
Pre-wash
Pre-wash(50 )
Wash (50 )
Rinse
Rinse(55 )
